Go Back   Home > Forums > > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubelab Discussion and support of Tubelab products, prototypes and experiments

Reply
 
Thread Tools Search this Thread
Old 14th December 2010, 05:18 AM   #1
Green77 is offline Green77  Sweden
diyAudio Member
 
Join Date: May 2007
Location: MJOLBY
Default Tone control in a TubelabSE?

Hi all!

Is it possible to ad a tone control in a TubelabSE?

I have looked at this one. And was thinking to build it in the same chassie as the amp.

Click the image to open in full size.

And do it like this:

CD in --> Tone control --> Volum --> AMP

Any problems?


Thanks //Daniel
  Reply With Quote
Old 14th December 2010, 06:53 AM   #2
artosalo is offline artosalo  Finland
diyAudio Member
 
artosalo's Avatar
 
Join Date: Feb 2010
I have used basically same circuit and it works great. Below is my version. It has also a voltage amplifying stage, which is in most cases not needed. Also the cathode follower - as in your example - is not necessary if the used signal source is having low impedance device like CD-player etc.

Very good feature of this circuit is - compared with passive one's - is that one can use linear potentiometers. Also the "flat" response is exactly at middle position of the pots.



Click the image to open in full size.
  Reply With Quote

Reply


Tone control in a TubelabSE?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tone control argonrepublic Solid State 11 13th November 2011 01:32 AM
Tone control argonrepublic Solid State 0 28th February 2010 12:12 AM
Guitar tone control teleman Instruments and Amps 5 25th September 2009 01:03 PM
i need preamp schematics w/o tone control or volume control hernanstafe Parts 7 30th January 2008 03:12 AM
!shame..tone control neutron7 Chip Amps 4 19th April 2004 04:19 PM


New To Site? Need Help?

All times are GMT. The time now is 10:28 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki