Go Back   Home > Forums > > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubelab Discussion and support of Tubelab products, prototypes and experiments

Thread Tools Search this Thread
Old 26th September 2008, 02:31 AM   #1
tigrine is offline tigrine  Canada
diyAudio Member
tigrine's Avatar
Join Date: Oct 2006
Default James JS-9611 with the SimpleSE

I would like to built another SimpleSE.
I have in stock a power transformer the James JS-9611.
Can I use it with the SimpleSE ?
For the 6.3V, I dont have only 2 wires like Hammond.
How should I connect the james to the board ?
Attached Images
File Type: jpg sans titre-numérisation-01.jpg (89.4 KB, 281 views)
  Reply With Quote
Old 26th September 2008, 02:43 AM   #2
Ty_Bower is offline Ty_Bower  United States
diyAudio Member
Ty_Bower's Avatar
Join Date: Mar 2007
Location: Newark, DE
You could parallel Secondary 3, 4 and 5 together and connect them to the Simple SE board. That would get you nine amps of 6.3 volts. That might even be too much capacity - you might find the heater voltage tends to run high. If so, just use two of the 6.3 volt secondaries.

Keep the 2.5 volt taps on sec 4 and sec 5 away from anything. Wire nut and / or tape them back safely out of the way.

Be sure to observe the proper phasing of the windings - if you parallel them out of phase, you'll get zero volts instead of 6.3.
  Reply With Quote


James JS-9611 with the SimpleSEHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: James 9611 or 9612 pabbi1 Swap Meet 3 21st November 2017 01:50 PM
FS: James JS-9611 Power Xfmr t3447ml Swap Meet 1 30th May 2009 11:10 PM
James Transformers JS-6113HS vsEdcorCXSE25-8-5K for SimpleSE Mungo Park Tubelab 9 24th April 2009 03:55 AM
SimpleSE and me allyourzigg Tubes / Valves 8 1st August 2007 03:44 AM
Fun with James Nixie The Lounge 2 1st March 2007 07:13 PM

New To Site? Need Help?

All times are GMT. The time now is 12:09 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio