|
Home | Forums | Rules | Articles | diyAudio Store | Blogs | Gallery | Wiki | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
The diyAudio Store A forum for discussing anything about the products available in The diyAudio Store. |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#11 |
diyAudio Member
Join Date: May 2010
Location: southern New Jersey
|
Thanks 6L6
The more I think about it and after reading about all the fakes around, I think maybe I will stick with the Vishays. I know I can get them from reputable dealers. I am starting to wonder about the 2SK170/2SJ74 I have. Do you know of reputable dealers selling them? I see FETAudio mentioned as a good source. Do you know of others? Thanks again. |
![]() |
![]() |
#12 |
diyAudio Moderator
|
The diyAudio Store will be stocking limited numbers of the Linear System's LSK170/LSJ74.
|
![]() |
![]() |
#13 |
diyAudio Member
Join Date: Apr 2008
Location: Qax
|
Hi folks!
Maybe it's a dummy question but I found slight difference between two F5 amplifiers schematics. At least it should be 4.2V on left image. Also there are two capacitors on PCB board. Which one is correct one or better one? And which PCB board do you prefer for this amp. I'm trying to make a short cut. ![]() ![]() Last edited by Insanoff; 8th November 2013 at 04:52 PM. |
![]() |
![]() |
#14 |
diyAudio Member
Join Date: Jun 2013
|
Could anyone provide the F5 V3.0 BOM?(2013-11-21 cviller layout)
Especially the "R35" on the PCB board. Thanks a lot. |
![]() |
![]() |
#15 |
diyAudio Member
|
Do not try to use the RURG8060 for Class A power supply. I almost finnished my F5 Turbo V 3. Tried with a vario. The vario got hot and never more then ca, 0,8 vdc came to capacitors. They was oscillating no doubt.
![]() |
![]() |
![]() |
#16 |
diyAudio Member
Join Date: Sep 2016
Location: Delhi
|
Guys I have a 0-18V X 2 secondaries toroidal transformer rated @ 600VA, do you think I can use it...
Last edited by kpsthakur; 26th February 2017 at 10:45 AM. Reason: updated for specs |
![]() |
![]() |
#17 |
diyAudio Moderator
|
Yes!
![]()
__________________
Illustrated Build Guides - Pass F4 - Pass B1 - Pass F5 - Pearl 2 - O2 HPA - Hagerman Bugle 2 - Pass Aleph J - Me at BA '13 -Pass F5Turbo - BA-3 Amp - BA-3 Preamp - F6 AmpCampAmp |
![]() |
![]() |
#18 |
diyAudio Member
Join Date: Sep 2016
Location: Delhi
|
|
![]() |
![]() |
#19 |
diyAudio Member
Join Date: Nov 2016
|
![]()
Looking for some help. I just finished assembling F5 amp using v3 boards/schematic and when I powered up to check/set bias things went up in smoke! In particular R7 and R8 lit up and Q1 and Q2 "popped". Looking at board it appears a few other resistors got hot too...R14, and R4 showing discoloration.
I have double checked, triple checked component placement/polarity and am coming up with nothing. Any input would be greatly appreciated! |
![]() |
![]() |
#20 |
diyAudio Member
Join Date: Jul 2004
Location: Minnesota
|
I would try asking at the F5 Build guide thread for help:
An illustrated guide to building an F5 |
![]() |
![]() |
Thread Tools | Search this Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
An illustrated guide to building an F5 | 6L6 | Pass Labs | 986 | 29th July 2017 06:20 AM |
MyRefC build guide | AndrewT | Chip Amps | 1119 | 29th July 2016 10:30 PM |
Guide to build Hypex Modules | souldriver | Class D | 85 | 16th July 2011 07:29 PM |
DIYaudio F5 V2 mounting holes | sts9fan | Pass Labs | 1 | 28th February 2011 11:04 PM |
New To Site? | Need Help? |