Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

The diyAudio Store A forum for discussing anything about the products available in The diyAudio Store.

4U chassis
4U chassis
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 12th November 2012, 07:44 PM   #1
thor61 is offline thor61
diyAudio Member
Join Date: Feb 2010
Default 4U chassis

Hello everyone ; Would the 4U enclosure stocked in the store have sufficient heat sinks for construction a F5C > P-F5c-2V20 - Pair of F-5c boards (Makes 2 channels; Rev 2.0) - Boards
  Reply With Quote
Old 20th November 2012, 01:17 AM   #2
JojoD818 is offline JojoD818  Philippines
diyAudio Moderator
JojoD818's Avatar
Join Date: Mar 2003
Location: searching...
4U chassis
If you will run the F5C in stock bias then yes it is more than enough. I am running an F5 in it's max bias setting and only get about 42*C, the ambient here is around 27*C to 28*C.

If you will run the F5C with a higher bias, that means you will need a bigger power supply and that may be a bit tricky to put together inside a 4U.
  Reply With Quote


4U chassisHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Chassis rsumperl Parts 0 30th June 2011 11:55 AM
What d'you put in the PSU chassis, and what in the circuit chassis? andyjevans Tubes / Valves 5 15th December 2007 12:41 AM
Chassis weinstro Solid State 10 24th January 2007 11:31 PM
How to star ground to Chassis without a Chassis?? Minion Chip Amps 10 5th November 2006 05:28 PM
Where to get chassis or chassis parts in Vancouver? Prune Parts 1 7th July 2004 06:37 PM

New To Site? Need Help?

All times are GMT. The time now is 06:52 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio