Looking for a Kenwood L-07MII power transformer

Klaude · 6th February 2007, 09:03 PM

Hi everyone.

I'm a new comer on DIY and after reading the rules i'm still not sure if i can post that here or , better , in the trading forum.

Anyway i was wandering if anyone stucked with a working orphan L-07MII would be ready to sell it or, if it is not working, would be ready to dispose of parts of it that are still good.

Thanks

Netlist · 6th February 2007, 09:06 PM

Welcome Klaude,

As this is a WTB (want to buy) I've moved it to Trading post.
Unfortunately you will need a Solid State guy to stumble on it but business is business so Trading post it went.

/Hugo

spind · 6th February 2007, 09:17 PM

There was some recent discussion of these amps in the VintageSolid State section of AudioKarma. A search and a message over on that forum may be helpful for you.

http://206.225.95.32/forums/index.php?

Steve.

KBK · 7th February 2007, 03:04 AM

There are enough transformer manufacturers these days that you might be able to retrofit both with new trannies that are 'off the shelf', if you want to go the stretch. Ie, do the looking and such.

6th February 2007, 09:03 PM	#1
Klaude diyAudio Member Join Date: Feb 2007 Location: Montreal	Looking for a Kenwood L-07MII power transformer Hi everyone. I'm a new comer on DIY and after reading the rules i'm still not sure if i can post that here or , better , in the trading forum. Anyway i was wandering if anyone stucked with a working orphan L-07MII would be ready to sell it or, if it is not working, would be ready to dispose of parts of it that are still good. Thanks

7th February 2007, 03:04 AM	#4
KBK diyAudio Member Join Date: Dec 2003 Location: The Wilds Of Canada	There are enough transformer manufacturers these days that you might be able to retrofit both with new trannies that are 'off the shelf', if you want to go the stretch. Ie, do the looking and such. __________________ "Never forget that only dead fish swim with the stream." -- Malcolm Muggeridge. "Truth cannot be brought down, rather the individual must make the effort to ascend to it." -- Jiddu Krishnamurti

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kenwood Power AMP KM-X1 transformer info	space2000	Solid State	0	21st June 2008 12:08 PM
Kenwood KAC-8152D no power	tritron	Car Audio	2	14th May 2008 06:52 AM
Kenwood L-07MII	desperateaudio	Solid State	5	25th February 2008 11:26 PM
Oscillations gone wild... Kenwood L-07MII	EchoWars	Solid State	17	8th December 2006 11:46 PM
FS: Kenwood (TRIO) L-05M and L-07MII	MJR	Swap Meet	1	8th September 2003 02:16 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

6th February 2007, 09:06 PM	#2
Netlist diyAudio Moderator Join Date: Jan 2003	Welcome Klaude, As this is a WTB (want to buy) I've moved it to Trading post. Unfortunately you will need a Solid State guy to stumble on it but business is business so Trading post it went. /Hugo

6th February 2007, 09:17 PM	#3
spind diyAudio Member Join Date: Feb 2003 Location: Winnipeg	There was some recent discussion of these amps in the VintageSolid State section of AudioKarma. A search and a message over on that forum may be helpful for you. http://206.225.95.32/forums/index.php? Steve.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)