FS: HiVi B3S project (drivers and filter) - $32 + shipping

owdi · 12th January 2007, 08:50 PM

These parts are left over from my HiVI B3S project. I copied the filter design from zaphaudio.com, so these parts are perfect for the Zaph Audio HiVi B3S Single Driver project.

I am selling to two of each of the following:

HiVi B3S full range driver

The BSC filter
.8 mh air core inductor (Jantzen)
2x 16 ohm non-inductive 2% resistors (Dayton)

The notch filter
.1 mh air core inductor (Jantzen)
4.3 uf polupropelane capacitor (Dayton)
30 ohm non-inductive 2% resistor (Dayton)

The .1 mh air core inductor needs to be unwound to .08 mh, otherwise the center frequency of the notch filter will be too low. The filters are not assembled.

The retail price of all these parts is $42.58. My price is $32 + shipping from 98001. I am willing to sell these without the BFC filter for $25 shipped.

My email address is danspublic AT gmail DOT com

Terms for Seattle area: I live in Bellevue. If you can come pick this up, I'll throw in an unfinished bipole center channel enclosure I built. (aprx. 24" x 5" x 6") Cash or postal MO, no personal checks please.

Terms for USA: I accept payment via Paypal, or a mailed postal money order. Shipping is up to you, so long as there is a tracking number.

Terms for ROW: If you are anywhere in North America, Europe or Australia, I will ship only after receiving payment via Paypal, or after I cash in your money order. You must also agree to purchase these items as-is, and take complete responsiblity for the package once I send it.

References: I bought a Behringer mic and mixer from Timn8ter a couple of months ago, and I occasinally buy/sell computer stuff on the forums at arstechnica.com. My reviews

More info:

I was using these as desktop speakers for a while. Nearfield imaging was as clear as headphones, without sounding like it's inside your head.

(enclosures not available, they were used with a different project)

maps · 13th January 2007, 02:35 PM

Hi,

just send you an email, consider them bought.

Thanks

Michael

owdi · 13th January 2007, 11:04 PM

Items have been sold.

Dan

12th January 2007, 08:50 PM	#1
owdi diyAudio Member Join Date: Sep 2003 Location: Bellevue, WA	FS: HiVi B3S project (drivers and filter) - $32 + shipping These parts are left over from my HiVI B3S project. I copied the filter design from zaphaudio.com, so these parts are perfect for the Zaph Audio HiVi B3S Single Driver project. I am selling to two of each of the following: HiVi B3S full range driver The BSC filter .8 mh air core inductor (Jantzen) 2x 16 ohm non-inductive 2% resistors (Dayton) The notch filter .1 mh air core inductor (Jantzen) 4.3 uf polupropelane capacitor (Dayton) 30 ohm non-inductive 2% resistor (Dayton) The .1 mh air core inductor needs to be unwound to .08 mh, otherwise the center frequency of the notch filter will be too low. The filters are not assembled. The retail price of all these parts is $42.58. My price is $32 + shipping from 98001. I am willing to sell these without the BFC filter for $25 shipped. My email address is danspublic AT gmail DOT com Terms for Seattle area: I live in Bellevue. If you can come pick this up, I'll throw in an unfinished bipole center channel enclosure I built. (aprx. 24" x 5" x 6") Cash or postal MO, no personal checks please. Terms for USA: I accept payment via Paypal, or a mailed postal money order. Shipping is up to you, so long as there is a tracking number. Terms for ROW: If you are anywhere in North America, Europe or Australia, I will ship only after receiving payment via Paypal, or after I cash in your money order. You must also agree to purchase these items as-is, and take complete responsiblity for the package once I send it. References: I bought a Behringer mic and mixer from Timn8ter a couple of months ago, and I occasinally buy/sell computer stuff on the forums at arstechnica.com. My reviews More info: I was using these as desktop speakers for a while. Nearfield imaging was as clear as headphones, without sounding like it's inside your head. (enclosures not available, they were used with a different project)

13th January 2007, 02:35 PM	#2
maps diyAudio Member Join Date: Dec 2005 Location: Winterthur	bought Hi, just send you an email, consider them bought. Thanks Michael

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HiVi D8.8 vs. Eton 11-581 Bass Drivers	Steve M	Multi-Way	7	8th February 2009 05:36 AM
Help with HiVi F8 Project	pp173	Multi-Way	15	22nd July 2008 04:17 AM
HiVi A3N project	gychang	Full Range	3	14th June 2007 11:24 PM
HiVi Research Drivers	Holty	Multi-Way	3	8th February 2007 08:31 PM
HiVI drivers in the UK	pinkmouse	Multi-Way	1	12th October 2006 12:49 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th January 2007, 11:04 PM	#3
owdi diyAudio Member Join Date: Sep 2003 Location: Bellevue, WA	Items have been sold. Dan

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)