"More stuff" final clearance sale.

Colescuttle · 30th December 2006, 08:26 PM

New diode grab bag, $35.00 US for the lot, including:
Eight (8) On Semi MUR880E installed on AudioSector SE board,
Eight (8) pieces On Semi MUR1520G,
Eight (8) pieces Vishay MUR1520G,
Eight (8) pieces IR1520PBF,
Eight (8) pieces On Semi MBR10100G,
Eight (8) pieces Vishay MBR101000,
Eight (8) Fairchild "Stealth," 8A, 600V.

Two (2) pieces (1 stereo set), short silver/rhodium plated copper Cardas Patented Binding Posts: $20.00 US plus shipping.

Four (4) Reference Audio Mods "Exotic" 4A, 600V rectifier bridges, each consisting of 16 superfast, soft recovery, surface mount 1A, 600V diodes assembled with silver wire, cryo-treated and mounted in pairs on a maple block: $50.00 US plus shipping (cost $200).

Four (4) new but naked 1000mF, 200V Jensen 4-pole electrolytics: $50.00 US plus shipping (cost $225.00).

One (1) new 1.5 meter Ack! digital cable. Terminated with 75 ohm BNC connectors (RCA adapters for both ends): $30.00 US plus shipping.

One (1) unused 1.5 meter Element digital cable. Terminated with Eichman copper Bullet Plugs (RCA): $15.00 US plus shipping.

Two (2) new Erse Super Q 20mH, 16 gauge, 500 watt coils: $15.00 US plus shipping.

Contact me at “george_cole’at’bellsouth.net” if interested.

Colescuttle · 31st December 2006, 01:42 PM

Someone really ought to try the RAM bidges and/or Jensen 4-poles. They are an exceptional bargain at $50 for four. Next stop, eBay.

George

Colescuttle · 31st December 2006, 05:07 PM

Somehow I missed a whole tube of diodes. I actually have 25 On Semi MBR10100 Schottkies.

badman · 1st January 2007, 08:29 PM

I'll take the coils and the jensens. $65 plus shipping to the address above? What will shipping to 08822 cost me?

Colescuttle · 2nd January 2007, 05:09 PM

Probably will find some more stuff around soon. This bench is a mess.

George

housing · 2nd January 2007, 06:51 PM

Hello George,

Did you receive my email?

Colescuttle · 5th January 2007, 03:29 PM

Although I will have some 20 or 25K mono attenuators, soon.

George

30th December 2006, 08:26 PM	#1
Colescuttle diyAudio Member Join Date: Sep 2006	"More stuff" final clearance sale. New diode grab bag, $35.00 US for the lot, including: Eight (8) On Semi MUR880E installed on AudioSector SE board, Eight (8) pieces On Semi MUR1520G, Eight (8) pieces Vishay MUR1520G, Eight (8) pieces IR1520PBF, Eight (8) pieces On Semi MBR10100G, Eight (8) pieces Vishay MBR101000, Eight (8) Fairchild "Stealth," 8A, 600V. Two (2) pieces (1 stereo set), short silver/rhodium plated copper Cardas Patented Binding Posts: $20.00 US plus shipping. Four (4) Reference Audio Mods "Exotic" 4A, 600V rectifier bridges, each consisting of 16 superfast, soft recovery, surface mount 1A, 600V diodes assembled with silver wire, cryo-treated and mounted in pairs on a maple block: $50.00 US plus shipping (cost $200). Four (4) new but naked 1000mF, 200V Jensen 4-pole electrolytics: $50.00 US plus shipping (cost $225.00). One (1) new 1.5 meter Ack! digital cable. Terminated with 75 ohm BNC connectors (RCA adapters for both ends): $30.00 US plus shipping. One (1) unused 1.5 meter Element digital cable. Terminated with Eichman copper Bullet Plugs (RCA): $15.00 US plus shipping. Two (2) new Erse Super Q 20mH, 16 gauge, 500 watt coils: $15.00 US plus shipping. Contact me at “george_cole’at’bellsouth.net” if interested.

31st December 2006, 01:42 PM	#2
Colescuttle diyAudio Member Join Date: Sep 2006	The Cardas posts, element and Ack cables are sold. Someone really ought to try the RAM bidges and/or Jensen 4-poles. They are an exceptional bargain at $50 for four. Next stop, eBay. George

31st December 2006, 05:07 PM	#3
Colescuttle diyAudio Member Join Date: Sep 2006	Correction Somehow I missed a whole tube of diodes. I actually have 25 On Semi MBR10100 Schottkies.

1st January 2007, 08:29 PM	#4
badman Custom Title diyAudio Member Join Date: Sep 2003 Location: Sunny Tustin, SoCal	I'll take the coils and the jensens. $65 plus shipping to the address above? What will shipping to 08822 cost me? __________________ I write for www.enjoythemusic.com in the DIY section. You may find yourself getting a preview of a project in-progress. Be warned!

2nd January 2007, 05:09 PM	#5
Colescuttle diyAudio Member Join Date: Sep 2006	Jensens, RAM bridges and coils have sold. Probably will find some more stuff around soon. This bench is a mess. George


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd January 2007, 06:51 PM	#6
housing diyAudio Member Join Date: Nov 2006	Hello George, Did you receive my email?

5th January 2007, 03:29 PM	#7
Colescuttle diyAudio Member Join Date: Sep 2006	The lot has been sold. Although I will have some 20 or 25K mono attenuators, soon. George

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Super Sanken Final Stage "Tauro"	Stee	Solid State	25	19th March 2008 09:01 PM
Some final pics of "Stacks" revisited and "Askew" with stand	Andy G	Multi-Way	2	3rd February 2005 07:07 AM
Bob Pease rants about "stuff" in EDN	Jocko Homo	Everything Else	6	12th December 2003 07:10 PM
DIY "Final Scratch" Turntable DSP	Ignite	Digital Source	5	26th February 2002 12:52 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read