Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

0.086" semi-rigid coaxial cable
0.086" semi-rigid coaxial cable
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 29th December 2002, 07:21 PM   #1
MRehorst is offline MRehorst
diyAudio Member
 
MRehorst's Avatar
 
Join Date: May 2002
Default 0.086" semi-rigid coaxial cable

I have about 20 pieces of 0.086" diameter semi-rigid coaxial cable- the stuff used for mm wavelength (up to 20 GHz) signal routing. It has teflon dielectric. Each piece is about 10' long. Mil-C-17/133 equivalent to RG405/U. This stuff is UNUSED.

The outer conductor is untinned copper (coated with some anticorrosive?), teflon dielectric, silver plated solid copper wire inner conductor. 50 Ohm impedance, but that won't matter at audio freqs. My impedance bridge says capacitance is about 28 pF/ft.

This stuff would be great for routing low level signals wherever a shield is needed. The rigidity and solid teflon dielectric should make it very unmicrophonic. Since the shield is solid, there are no holes for signal leakage. Frequency response is definitely NOT an issue!

You can easily bend it by hand. The copper shield can easily be removed with a razor knife -just score it then use pliers to bend it a little and the copper will tear very neatly along the scored line. The shield is as easy to solder as the inner conductor, though you might want to clean it a little first with flux or even steel wool/emory cloth.

$10 per piece (10 feet long, give or take an inch), two pieces minimum, plus shipping. I will ship by mail- I'll roll it into about an 8" diameter coil. Alternatively, I can cut it into 24" lengths and ship it in a tube. checks, money orders and pay pal accepted.

email for details: rehorstmark@netscape.net

Thanks,
MR
  Reply With Quote

Reply


0.086" semi-rigid coaxial cableHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
coaxial loudspeaker cable ??? montana Multi-Way 1 11th April 2008 03:44 PM
Coaxial Cable Capacitance -_nando-_ Parts 2 17th March 2007 04:13 PM
what type of digital coaxial cable is "in" right now? RemoGaggi Digital Source 1 12th December 2006 02:03 AM
microphone cable vs coaxial cable Leolabs Parts 4 31st August 2006 10:24 AM
2" rigid high density fiberglass for acoustic room treatments? darkmoebius Everything Else 6 6th May 2005 08:44 PM


New To Site? Need Help?

All times are GMT. The time now is 01:21 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki