Caps Needed, 20Kuf @ 70vdc 2" x 4"

[Zero Cool]

My new prized today only to find that the trafo came loose in transit and smashed into the PSU caps! So, i am now on the hunt for caps to fit what i have.

The caps must be 2" in diameter and 4" long

They need to be at least 20,000uf and at least 70VDC

Will pay a fair price for a set of four.



I also have many pairs of large 10Kuf+++ 70-100+VDC caps for trade.

Also at least 6-8 18,000uf 80V Snap in types 35mm x 55mm CDE brand. these are new.


Zc

[Apex Jr]

Mine are close 22,000 Uf 100 Volt New Stock Hitachi

www.apexjr.com/images/CAP22KMFD.JPG

2 1/2" x 4" and $15.00 each

Steve @ Apex Jr.

[Zero Cool]

Originally posted by Apex Jr
Mine are close 22,000 Uf 100 Volt New Stock Hitachi

www.apexjr.com/images/CAP22KMFD.JPG

2 1/2" x 4" and $15.00 each

Steve @ Apex Jr.

Actually, your website was the first place i looked! I even checked ebay, but no luck. so i was hoping another DIY'er could help me with some.

I saw those Hitachi's! Problem is i cant make them fit. the 4 caps in this amp fit very tight and screw to a PCB board and there isnt enough room to fit a 2-1/2" cap. so i am stuck. i have to find some that are 2" x 4" or they wont fit.

Thank you for responding, great price on those and you have some larger as well for a good price!


Zc

[BWRX]

You can try looking here: http://www.tedss.com/specSearch.asp?cat=Capacitors

Good luck finding >20,000uF with a >70V rating in a 2" diameter x 4" can though... Most everything I've seen is at least 2.5" diameter and longer than 4".

[Zero Cool]

Ohh that place is expensive! I did find some both Newark and Digi-Key have some listed at $40.00 each. I was hoping to find some used however.


Zc