WTB: High quality caps 1000uF 63-100V

folkeb · 3rd December 2006, 03:14 PM

I'm after high quality caps for my Aleph P clone project. I need 1000 uF, preferably 75-100 volts. I need between 10 and 20 pieces.

Best regards,
Folke

Angst · 3rd December 2006, 03:29 PM

I used 1000uF/100V MXR Rubycon from Conrad electronics á 5,-€

Minion · 3rd December 2006, 07:18 PM

I get Nichicon VR 1000uF 50v Caps for .11c each ,If yer interested I"ll post the link for you....

Cheers

folkeb · 3rd December 2006, 07:24 PM

Thanks, but the caps should be over 75 volts.

Best regards,
F

Minion · 3rd December 2006, 07:40 PM

Well it seems one you get past 50v the caps really jump in Price....

Here you can get 5 for $10 and are 200v:

http://cgi.ebay.ca/5-LOT-NIPPON-CHEM...QQcmdZViewItem

Here you can get 20 100v caps for $10:

http://cgi.ebay.ca/1000uf-100v-Elect...QQcmdZViewItem

I have a bunch of 10,000uF 63v Caps if you wanted them but I think they are much bigger than you need....

Good luck

theAnonymous1 · 3rd December 2006, 10:17 PM

I might be interested in some of your 10000uf caps if their not too exspensive.

Drop me a mail with a price for 8 of them.

Thanks

max29 · 4th December 2006, 05:42 AM

Got some Nichicon muse 1000 uf, 47000uf and 10000uf 63 volts they do a lot of good in a powersupply

elviukai · 4th December 2006, 07:40 AM

I have few siemens epcos sikorel caps to sell if you need. the best available cap for power suply.IMHO. slightlky more rsoliution even compare to Black gate standart in power suplies. I used it at my P 1.7 with outstanding results. however they are expensive.
I have

NOS siemens sikorel 1000uf 100v date code 86 80pieces
NOS epcos sikorel 2200uf 100V date code 02 42pieces
NOS epcos sikorel 4700uf 100V date code 02 72 pieces

good luck in projects

folkeb · 4th December 2006, 08:39 AM

Elviukai:

You have mail...

elviukai · 4th December 2006, 01:00 PM

Hi folkeb I will write back at evening when I check prices what I have paid for them.

Hi AMV8 - I will write back also.

Note - I will sell only few caps- 20-40pieces max. theese things is very hard to get- I am colecting new powersuply for my aleph and almost two years having problem to find bigger than 4700uf siemens /epcos sikorel caps.

also theese caps are big , they didnt fitted to kristijan pcb and I need wired them with kimber 8tc cable localy.keep in mind.

3rd December 2006, 03:14 PM	#1
folkeb diyAudio Member Join Date: Jan 2006 Location: Trondheim	WTB: High quality caps 1000uF 63-100V I'm after high quality caps for my Aleph P clone project. I need 1000 uF, preferably 75-100 volts. I need between 10 and 20 pieces. Best regards, Folke

4th December 2006, 01:00 PM	#10
elviukai diyAudio Member Join Date: Apr 2003 Location: EU- Electronic Union country	Hi folkeb I will write back at evening when I check prices what I have paid for them. Hi AMV8 - I will write back also. Note - I will sell only few caps- 20-40pieces max. theese things is very hard to get- I am colecting new powersuply for my aleph and almost two years having problem to find bigger than 4700uf siemens /epcos sikorel caps. also theese caps are big , they didnt fitted to kristijan pcb and I need wired them with kimber 8tc cable localy.keep in mind. __________________ natural sound reproduction from traditional dynamic drivers?!! come on.. no no, it can be.. it must be!..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
High Quality Caps.	DiskDoctor	Swap Meet	5	19th March 2007 09:23 PM
Quality Audio Electrolytic Caps for High HT applicaiton	teocc_1308	Parts	2	24th March 2006 02:35 PM
Small, Inexpensive High Quality Film and Foil Caps	dsavitsk	Parts	5	7th February 2006 01:25 AM
Where to find 1000uF 450V / 400V caps?	ainami	Parts	4	7th January 2005 05:39 PM
1000uf 100V caps?	cowanrg	Parts	4	25th September 2003 08:25 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

3rd December 2006, 03:29 PM	#2
Angst diyAudio Member Join Date: Jun 2006	I used 1000uF/100V MXR Rubycon from Conrad electronics á 5,-€

3rd December 2006, 07:18 PM	#3
Minion diyAudio Member Join Date: May 2006	I get Nichicon VR 1000uF 50v Caps for .11c each ,If yer interested I"ll post the link for you.... Cheers

3rd December 2006, 07:24 PM	#4
folkeb diyAudio Member Join Date: Jan 2006 Location: Trondheim	Thanks, but the caps should be over 75 volts. Best regards, F

3rd December 2006, 07:40 PM	#5
Minion diyAudio Member Join Date: May 2006	Well it seems one you get past 50v the caps really jump in Price.... Here you can get 5 for $10 and are 200v: http://cgi.ebay.ca/5-LOT-NIPPON-CHEM...QQcmdZViewItem Here you can get 20 100v caps for $10: http://cgi.ebay.ca/1000uf-100v-Elect...QQcmdZViewItem I have a bunch of 10,000uF 63v Caps if you wanted them but I think they are much bigger than you need.... Good luck

3rd December 2006, 10:17 PM	#6
theAnonymous1 diyAudio Member Join Date: Feb 2004 Location: Anonymityville	I might be interested in some of your 10000uf caps if their not too exspensive. Drop me a mail with a price for 8 of them. Thanks

4th December 2006, 05:42 AM	#7
max29 diyAudio Member Join Date: Nov 2005 Location: oosterhout	Got some Nichicon muse 1000 uf, 47000uf and 10000uf 63 volts they do a lot of good in a powersupply

4th December 2006, 08:39 AM	#9
folkeb diyAudio Member Join Date: Jan 2006 Location: Trondheim	Elviukai: You have mail...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)