• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Neoplanar 8" midranges

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Neoplanar 8" midrange drivers. Manufacturer's specs are 93-94dB/1W (4 ohm drivers), 500Hz to 10kHz. Stainless steel faces, neodymium magnets. Hooked them up (with a cap in series) and they play just fine. I've moved up the efficiency scale to PHLs and a JBL compression driver - these no longer fit with my speaker-building plans.

E-mail with questions or for photos. $60 shipped in the US.

Paul
 
specs

Hans -

I responded to your e-mail - may have gotten caught in your spam filter. Manufacturers specs are 500Hz to 10kHz range (although with practical filters it really ought to be about 800 to 8000 hz). 4 ohm driver. 94db/1W (I haven't measured this to validate, but they do play louder than some standard tweeters i have around when directly hooked up to an amp through a cap.)

Let me know if you have any further questions.

Thanks!

Paul
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.