Greetings,
I have just built my PJ not too long ago and have enjoyed it for about a month.
But its just too big of a box for my 2 BR Appartment, and it kinda ends up sitting more in the cornor then it being used. I have literally watched like 6 some movies on it since completed. Yada...Yada...Yada...
Anyways, here is the link to some pics of the completed box/results:
My 19" LCD Projector
I have two choices:
1. Either Entire PJ - $897.95
Since I have the 19" LCD, I will include a 18" EF Projection Lens that I use for you to play with and decide what you want to use (Lens is a bit dirty but is not noticiable when in use. Check out my Results phots. Pics are of the 18" EF Lens) I ordered the LL Pro Triplet and have tested it and the entire screen focuses nicely but have not attached it with the encloser so you have to play with this part. Bottom Line is I will have both the triplets included and you can pic which one you want. The LL Triplet is brand new and still in its new wrapping. I would prefer Local Pickup - Westminster, MD 21157.
2. Everything Seperate:
LCD Monitor - $200.00 - 1 Dead Pixel Line - Not noticiable during movie playback.
LL65K T15 Lamp - $189.99 (Lamp has less then 25 hours on it)
Tempered Glass - $35.00
Pro Reflector (Check Pics) - $35.99 (Mounted with Parts)
Pro Condenser Fresnel Lens F220 - $21.99
Pro Field Fresnel Lens F650 - $21.99
3dLens F330 Fresnel (Framed) - $35.00
3dLens F550 Fresnel (Framed) - $35.00
Wood Encloser Cost - $75.00
Ac Adapter To Power Fans - $10.00
LL Pro Triplet - $189.99
18" EF Opeque Lens - $40.00
(This lens is a bit dirty and is sorta broken, but I am using it with no problem. Pic/Results show how nicely it works.)
==========================
Either Post Reply, PM OR Email: online@gssmind.com
Thanks For Looking/Interest.
I have just built my PJ not too long ago and have enjoyed it for about a month.
But its just too big of a box for my 2 BR Appartment, and it kinda ends up sitting more in the cornor then it being used. I have literally watched like 6 some movies on it since completed. Yada...Yada...Yada...
Anyways, here is the link to some pics of the completed box/results:
My 19" LCD Projector
I have two choices:
1. Either Entire PJ - $897.95
Since I have the 19" LCD, I will include a 18" EF Projection Lens that I use for you to play with and decide what you want to use (Lens is a bit dirty but is not noticiable when in use. Check out my Results phots. Pics are of the 18" EF Lens) I ordered the LL Pro Triplet and have tested it and the entire screen focuses nicely but have not attached it with the encloser so you have to play with this part. Bottom Line is I will have both the triplets included and you can pic which one you want. The LL Triplet is brand new and still in its new wrapping. I would prefer Local Pickup - Westminster, MD 21157.
2. Everything Seperate:
LCD Monitor - $200.00 - 1 Dead Pixel Line - Not noticiable during movie playback.
LL65K T15 Lamp - $189.99 (Lamp has less then 25 hours on it)
Tempered Glass - $35.00
Pro Reflector (Check Pics) - $35.99 (Mounted with Parts)
Pro Condenser Fresnel Lens F220 - $21.99
Pro Field Fresnel Lens F650 - $21.99
3dLens F330 Fresnel (Framed) - $35.00
3dLens F550 Fresnel (Framed) - $35.00
Wood Encloser Cost - $75.00
Ac Adapter To Power Fans - $10.00
LL Pro Triplet - $189.99
18" EF Opeque Lens - $40.00
(This lens is a bit dirty and is sorta broken, but I am using it with no problem. Pic/Results show how nicely it works.)
==========================
Either Post Reply, PM OR Email: online@gssmind.com
Thanks For Looking/Interest.
Reduce Price and Organized Listing
Greetings,
Reduced Price and Organized Listing:
For Sale is Everything Below:
---------------------------------
LCD Monitor - $190.00
* Dell FP1905
* Stripped - Read to go!!!
* Anti-glare(AG) STILL ON LCD
NOTE: 1 Dead Pixel Line
Not noticiable during movie playback.
---------------------------------
---------------------------------
Lumen Lab LL65K T15 Lamp Kit - $185.00
* LL65K T15 Lamp - (Lamp Used For Less Then 25 Hours)
* Mogul base HID Socket
* LL/Vue 400w eBallast
---------------------------------
---------------------------------
Lumen Lab Pro Projection Lens Triplet - $189.99
* Focal Length - 500mm
---------------------------------
---------------------------------
18" EF Opeque Lens - $40.00
* This lens is a bit dirty and is sorta broken
* I am using it with no problem.
* Pic/Results shows how nicely it works.
---------------------------------
---------------------------------
2 Tempered Glass - $35.00/each
* 15" x 17"
---------------------------------
---------------------------------
Pro Reflector - $35.00 (Mounted with Parts)
* Dia = 74mm
* R = 44mm
* EFL = R/2 = 22mm
---------------------------------
---------------------------------
3dLens F330 Fresnel (Framed) - $35.00
* Thickness: 1.8mm
* Weight: 280 grams
* Material: optical acrylic
* Groove pitch: 0.2mm
* Focal length: 330mm
---------------------------------
---------------------------------
3dLens F550 Fresnel (Framed) - $35.00
* Thickness: 1.8mm
* Weight: 280 grams
* Material: optical acrylic
* Groove pitch: 0.2mm
* Focal length: 550mm
---------------------------------
---------------------------------
Wood Encloser Cost - $75.00
* 3/4" MDF
---------------------------------
---------------------------------
Ac Adapter Power Fans - $10.00
* 3.5V - 12 Volt
* Polarity Change Pin
---------------------------------
---------------------------------
6 Cooler Master 80mm - $15.00 - For All 6
* Fan Size: 80 x 80 x 25mm
* Bearing Type - Sleeve
* RPM - 2000 ± 10%rpm
* Air Flow - 28.894cfm
* Noise Level - 24.4dBA
* Power Connector - 3 Pin
* Color - Black
---------------------------------
Either Post Reply, PM OR Email: online@gssmind.com
Thanks For Looking/Interest.
==========================
Greetings,
Reduced Price and Organized Listing:
For Sale is Everything Below:
---------------------------------
LCD Monitor - $190.00
* Dell FP1905
* Stripped - Read to go!!!
* Anti-glare(AG) STILL ON LCD
NOTE: 1 Dead Pixel Line
Not noticiable during movie playback.
---------------------------------
---------------------------------
Lumen Lab LL65K T15 Lamp Kit - $185.00
* LL65K T15 Lamp - (Lamp Used For Less Then 25 Hours)
* Mogul base HID Socket
* LL/Vue 400w eBallast
---------------------------------
---------------------------------
Lumen Lab Pro Projection Lens Triplet - $189.99
* Focal Length - 500mm
---------------------------------
---------------------------------
18" EF Opeque Lens - $40.00
* This lens is a bit dirty and is sorta broken
* I am using it with no problem.
* Pic/Results shows how nicely it works.
---------------------------------
---------------------------------
2 Tempered Glass - $35.00/each
* 15" x 17"
---------------------------------
---------------------------------
Pro Reflector - $35.00 (Mounted with Parts)
* Dia = 74mm
* R = 44mm
* EFL = R/2 = 22mm
---------------------------------
---------------------------------
3dLens F330 Fresnel (Framed) - $35.00
* Thickness: 1.8mm
* Weight: 280 grams
* Material: optical acrylic
* Groove pitch: 0.2mm
* Focal length: 330mm
---------------------------------
---------------------------------
3dLens F550 Fresnel (Framed) - $35.00
* Thickness: 1.8mm
* Weight: 280 grams
* Material: optical acrylic
* Groove pitch: 0.2mm
* Focal length: 550mm
---------------------------------
---------------------------------
Wood Encloser Cost - $75.00
* 3/4" MDF
---------------------------------
---------------------------------
Ac Adapter Power Fans - $10.00
* 3.5V - 12 Volt
* Polarity Change Pin
---------------------------------
---------------------------------
6 Cooler Master 80mm - $15.00 - For All 6
* Fan Size: 80 x 80 x 25mm
* Bearing Type - Sleeve
* RPM - 2000 ± 10%rpm
* Air Flow - 28.894cfm
* Noise Level - 24.4dBA
* Power Connector - 3 Pin
* Color - Black
---------------------------------
Either Post Reply, PM OR Email: online@gssmind.com
Thanks For Looking/Interest.
==========================
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.