• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Tube Experimenter PCB's

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi all,

I have some more of the vacuum tube experimenter boards that were introduced at Planet10's diyAudio fest last month. I also have as per some of your requests, octal versions.

I have only 4 of each type, octal and 9-pin - $15.50 USD/ea. That is for the PCB only, without the sockets, or shipping.

I can toss in the sockets for an additional $1.50/ea for the octal and $1.00/ea for the 9-pin. The sockets are new manufacture Shuguang ceramic and the prices are only for with the PCB deal.

All prices are in USD.

These are *not* offered on my site and different than the ones I carry commercially, being samples and all. Special offer for the DIY'ers here. If there's enough interest, maybe we can do a group buy.

Please contact for shipping charges. Canadian's - I need a postal code for your shipping quote; USA - just your state. International orders OK.

Pics (about 100KB/each):
http://bb.sicomm.us/diyAudio/PCB/Octal_PCB_with_sockets.jpg
http://bb.sicomm.us/diyAudio/PCB/Octal_PCB.jpg
http://bb.sicomm.us/diyAudio/PCB/Octal_PCB_solder_side.jpg
http://bb.sicomm.us/diyAudio/PCB/Octal_PCB_CCS_pads.jpg
http://bb.sicomm.us/diyAudio/PCB/Octal_PNP_CCS.jpg
http://bb.sicomm.us/diyAudio/PCB/Octal_NPN_CCS.jpg

http://bb.sicomm.us/diyAudio/PCB/9-pin_PCB_with_sockets.jpg
http://bb.sicomm.us/diyAudio/PCB/9-pin_PCB_solder_side.jpg
http://bb.sicomm.us/diyAudio/PCB/9-pin_PCB_CCS_pads.jpg
http://bb.sicomm.us/diyAudio/PCB/9-pin_PNP_CCS.jpg
http://bb.sicomm.us/diyAudio/PCB/9-pin_NPN_CCS.jpg
 
Hi Josh,

Kinda would help if I added contact info, huh.

geek <at> scorpiorising <dot> ca

@ cocos - no links, got an exclusive on these. It's a heavy duty 2.4mm fiberglass laminate with two CCS on it, one NPN and one PNP. Can be used as both NPN or PNP, by flipping components around against the silkscreen for the opposite effect. Drilled for 9-pin or octal sockets, depending on the board. Can be used for experimentation or a final project.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.