diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Swap Meet (http://www.diyaudio.com/forums/swap-meet/)
-   -   FS: Populated LM3886 and LM3875 gainclone boards (http://www.diyaudio.com/forums/swap-meet/83971-fs-populated-lm3886-lm3875-gainclone-boards.html)

motherone 30th July 2006 11:06 PM

FS: Populated LM3886 and LM3875 gainclone boards
 
I have the following assembled gainclone boards available. They are assembled, but untested!

6x Digi01 based LM3886 amp boards, each populated with the following specs:

- 1x LM3886TF (insulated)
- 2x 1000uF/50V Nichicon muse power caps
- 1x Dale LVR 0.06 ohm output resistors
- 2x 215k Draloric Resistors
- 1x 20k Vishay RN55 mute resistor
- 1x 1/2 watt 2% Corning Glassware Carbon Comp resistor

Asking $50/pair or $135 for the whole set of 6.

note: These do not include rectifier boards like the BrianGT/Peter Daniel boards.

-------------------------------------------------------

1x Pair of completed BrianGT LM3875 boards, each populated with the following:

1x Red LM3875 PCBs with LM3875TF (isolated)
2x Nichicon Muse KZ 1000uF/50V capacitors
4x 18.7K 0.1% Vishay RNC90Y (S102 equiv) resistors
2x 600R 0.05 % Vishay RNC907 resistors
2x 200R Vishay 447P (I think also S102 equiv) resistors

Includes 2x rectifier boards populated with 16x MUR8100E Diodes and 4x 4.7uF/50V Panasonic FC capacitors

Asking: $115 for the completed pair

This is enough to build a pair of monoblock amplifiers.

-------------------------------------------------------

2 pairs of completed BrianGT LM3875 boards, each populated with the following:

4x Red LM3875 PCBs with LM3875TF (isolated)
8x Panasonic FC 2200uF/50V capacitors
8x 22k 1% Caddock MK132 resistors
4x 680R 1% Holco H2 resistors
4x 221R Caddock MK132 Resistors

Includes two rectifier boards, populated 16x MUR8100E Diodes and 4x 4.7uF/50V Panasonic FC capacitors, and two unpopulated rectifier boards.

Asking: $175 for the 4 LM3875 boards, 2 populated Rectifier boards, and 2 unpopulated rectifier boards.

This enough to build two stereo amplifiers, or 4 monoblocks of you populate the additional rectifier boards.

-------------------------------------------------------

All of the Vishay resistors are (from my understanding) the mil-spec equiv of the Vishay S102 line. All of the boards (except the unpopulated rectifier boards) are soldered and should be ready to go. I have *NOT* tested these, as the primary reason for selling is I don't have time to finish these projects up.

I will ship via Priority Mail to US Residents only. My guess is that insured shipping would be ~$7.50. I can take payment via Paypal, those wanting to do it via credit card, please add 3%. Please feel free to e-mail me questions or offers at: m i k e at m o TH e r o ne do t com

motherone 6th August 2006 04:02 AM

Boards are still available.


All times are GMT. The time now is 12:55 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2