diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Swap Meet (http://www.diyaudio.com/forums/swap-meet/)
-   -   Wanted: Tvc (http://www.diyaudio.com/forums/swap-meet/82261-wanted-tvc.html)

doctersava 28th June 2006 03:10 PM

Wanted: Tvc
 
Wanted passive pre / TVC, preferably using Stevens & Billington TX102.

Kindly attach a picture to your reply.

Thanks!

NickC 29th June 2006 05:01 AM

Hi
If you are interested in a brand new TVC
do check us out

www.promitheusaudio.com

Feedback from our customers mention that it beats the S n B

Cheers
NIcholas

NickC 29th June 2006 07:02 AM

I see that you just purchase a unit from us thru ebay.

THanks

Nicholas

superhkm 29th June 2006 07:58 AM

This is diyAudio.com , how about offering a kit, without the case ? ( I want a passive pre with source selector )
Maybe transformers only ?

rick57 3rd July 2006 11:51 AM

Hi Nicholas

> 17 steps with Ė2 db between steps

Thatís Ė 34 dB: do you have any versions with more, preferably Ė53 dB (intact audio special order) or like SACT (?)?

Thanks

NickC 3rd July 2006 02:44 PM

Rick
Our latest offering is a stereo 24 pole volume control with steps up to -48db each step of -2db. This way you would have more finite control over your volume. However we also do custom jobs to accomadate different db rating like yours of -53 db. (however note maximum so far of steps is 24 steps only) at NO ADDITIONAL COST just slightly longer manufacturing time as we keep the the new 24 pole version in stock.

However i believe the -53 db is seldom in demand unless of horn users so we do it by custom basis we no surcharge. So if you need higher email us your requirements with the db rating will be best

Also by popular request our new offerings will be 5 inputs instead of the normal 2 poles. REcently we have been doing alot of custom job requesting 5 inputs and stereo volume control and higher -db attenuation. So we have come up with our latest offering to address the current user requirements

CHeers
NIcholas

elementx 7th July 2006 05:45 PM

Quote:

Originally posted by superhkm
This is diyAudio.com , how about offering a kit, without the case ? ( I want a passive pre with source selector )
Maybe transformers only ?


look around, this has turned into BIYaudio... buy it yourself audio! ha! what's so diy about a kit without a case?
:cool:

superhkm 7th July 2006 07:06 PM

Quote:

Originally posted by elementx



look around, this has turned into BIYaudio... buy it yourself audio! ha! what's so diy about a kit without a case?
:cool:


I really don't know, if soldering the input to the switch is not DIY, but soldering the switch to the transformer is (DIY) then I guess you are right. ;)

rick57 8th July 2006 01:14 AM

Guys, this is the Trading Post ;)

Nicholas

Do you have a picture?

Ever ABed to a ladder attenuator?

Can you incorporate remote volume??

When Iíve made my speakers & played them in room, Iíll let you know what I need


Cheers

NickC 8th July 2006 05:42 AM

Rick57
check out our webpage at
www.promitheusaudio.com

Because this is a passive volume control, no point to have a remote volume control , It corrupts the sound due to the noise from the controller spraying everywhere. Also because this is a high bandwidth trans, it picks it up and in shows in noise.

Yes we have ab with the volume control, let say it is better in the areas of fludity, musically, involvement,soundstage and drive. However transparency it is not as good as the ladder attenuator. however the ladder always sounds dry sounding abit noisy compared to the tvc types. Drive is very apparently lacking with attneuator even it is properly match.

As i am selling it with a profit, perhaps anyone who wants more info pls do not hesitate to drop us an email. May not be ethical to post here.

Best regards
Nicholas


All times are GMT. The time now is 09:43 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2