Wanted: 500va 25voltsX2

KenP · 26th November 2002, 06:42 PM

Does anyone have a toroidal transformer like this to sell? Just thought I'd ask before ordering from Plitron.

roddyama · 26th November 2002, 09:28 PM

Hi Ken,

I have a 500VA ILP (now Plitron) with dual 110V inputs and 4 X 24V outputs that I bought from Old Colony 20 years ago for the Pass A40. I'm looking to get rid of it. If your interested, let me know and we can work out the details.

Rodd Yamashita

KenP · 26th November 2002, 10:15 PM

Would that work with a p3a? They specify 25-0-25 minimum.

Jean · 26th November 2002, 10:35 PM

KenP,

I am using Avel 500va for p3a but its way overkill for only 2 channels. You can get a 330va 25-0-25 for $46 and last time it was in stock.

P.S. 24-0-24 would work just fine too.

roddyama · 26th November 2002, 10:46 PM

Quote:

Originally posted by KenP
Would that work with a p3a? They specify 25-0-25 minimum.

Hi Ken,

I went and looked at p3a at Rod Elliot's site. I couldn't find where he suggests a lower limit for the rail voltage except on the initial power-up where he says

Quote:

When power is applied, check that the DC voltage at the output is less than 1V, and measure each supply rail. They may be slightly different, but both should be no less than about 20V.

He also limits the upper rail voltage to 35VDC when driving a 4ohm load. With this transformer you'll have about +/-32VDC rails, which should work fine.

Where in Canada are you?
Rodd Yamashita

KenP · 26th November 2002, 10:49 PM

Just south of Montreal. How much did you want for it.

roddyama · 26th November 2002, 10:57 PM

Ken,

I'll take $30USD plus shipping. I'll post a pic in a few minutes. BTW, it has never been used.

Rodd Yamashita

roddyama · 26th November 2002, 11:01 PM

Here's a pic.

Rodd Yamashita

KenP · 26th November 2002, 11:10 PM

What are the dimensions? How can I pay you, do you take paypal?

roddyama · 26th November 2002, 11:17 PM

Ken,

Sending you an email.

Rodd Yamashita

26th November 2002, 06:42 PM	#1
KenP diyAudio Member Join Date: Jan 2002 Location: Canada	Wanted: 500va 25voltsX2 Does anyone have a toroidal transformer like this to sell? Just thought I'd ask before ordering from Plitron.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trade? my (2) 20-0-20/500VA for (2) 28-0-28/500VA...	sklimek	Swap Meet	6	10th June 2009 05:12 PM
Fs 500va 18v	dhole	Swap Meet	0	23rd January 2009 08:57 AM
Looking for dual 25 - 28V 500VA Transformer	john65b	Swap Meet	0	1st August 2008 02:59 AM
Wanted: Two 500VA-700VA 40-0-40 Transformers	Spiritzly	Swap Meet	0	27th August 2006 11:04 AM
500VA Toroids for Sale	WALTER BURKHARD	Swap Meet	1	30th October 2003 02:38 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

26th November 2002, 09:28 PM	#2
roddyama diyAudio Moderator Emeritus Join Date: Jan 2002 Location: Michigan	Hi Ken, I have a 500VA ILP (now Plitron) with dual 110V inputs and 4 X 24V outputs that I bought from Old Colony 20 years ago for the Pass A40. I'm looking to get rid of it. If your interested, let me know and we can work out the details. Rodd Yamashita

26th November 2002, 10:15 PM	#3
KenP diyAudio Member Join Date: Jan 2002 Location: Canada	Would that work with a p3a? They specify 25-0-25 minimum.

26th November 2002, 10:35 PM	#4
Jean diyAudio Member Join Date: Mar 2002 Location: Sacramento, CA	KenP, I am using Avel 500va for p3a but its way overkill for only 2 channels. You can get a 330va 25-0-25 for $46 and last time it was in stock. P.S. 24-0-24 would work just fine too.

26th November 2002, 10:49 PM	#6
KenP diyAudio Member Join Date: Jan 2002 Location: Canada	Just south of Montreal. How much did you want for it.

26th November 2002, 10:57 PM	#7
roddyama diyAudio Moderator Emeritus Join Date: Jan 2002 Location: Michigan	Ken, I'll take $30USD plus shipping. I'll post a pic in a few minutes. BTW, it has never been used. Rodd Yamashita

26th November 2002, 11:10 PM	#9
KenP diyAudio Member Join Date: Jan 2002 Location: Canada	What are the dimensions? How can I pay you, do you take paypal?

26th November 2002, 11:17 PM	#10
roddyama diyAudio Moderator Emeritus Join Date: Jan 2002 Location: Michigan	Ken, Sending you an email. Rodd Yamashita

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)