FA/FS: Vifa Built 1" Silk Dome Tweeters - diyAudio
Go Back   Home > Forums > Commercial Sector > Swap Meet
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 23rd November 2002, 05:19 AM   #1
diyAudio Member
Join Date: Nov 2002
Location: Toronto, Ontario, Canada
Send a message via ICQ to CanuckAP Send a message via AIM to CanuckAP Send a message via MSN to CanuckAP Send a message via Yahoo to CanuckAP
Default FA/FS: Vifa Built 1" Silk Dome Tweeters


Pair of Vifa built 1" silk dome tweeters, with custom painted cast metal front plate. Canadian designed tweeters are made by Vifa for the Kinima series speakers from Zetag Corp. These have an "fo" of 1400 Hz, they are hollow pole piece devices using a 1/4" wool silk felt pole piece damping ring, this cancels any rear wave signal that might bounce off the pole piece. They have a rear chamber which is filled with rayon, which acts like a transmission line to cancel the rear wave totally. The voice coil is magnetic fluid damped. They use an extremely fast and accurate ultra open weave doped pure silk dome of 1" diameter. This tweeter has extraordinarily broad dispersion compared to other tweeters, frequency response still maintaining excellent dispersion is out to 22 kHz. Very low distortion device, capable of considerable output. They have been measured and matched to be within 1db of each other and the terminals are already tinned with silver solder. Similar to Seas and Scan Speak, tweeters in performance at a fraction of the price. I originally bought these for a Home Theatre DIY project that I'm no longer going to complete.


8 Ohm, 75 Wrms, 2.8 kHz - 22 kHz, 91.5 dB @ 1w/1m,10 Oz magnet, 4 1/4" overall diameter with a 3" hole cut out, 2 pairs available.

Higher resolution pics available by email.
Pics on all the above can be seen at: http://canuck.audioguy.net/forsale.html
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
6.5" silver flute with 1 1/8" dayton silk dome tweeter jadenlinkletter Multi-Way 10 28th February 2006 07:20 AM
Dayton 1-1/8" Silk Dome Tweeter Dr. Photon Multi-Way 1 1st July 2005 08:41 AM
Dayton 6" reference and dayton silk dome tweeter combo project...input? nerd of nerds Multi-Way 4 2nd December 2004 05:36 PM
fabric dome tweeters (Seas vs. Vifa) kamppi Multi-Way 16 17th February 2004 01:15 PM

New To Site? Need Help?

All times are GMT. The time now is 04:04 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2