Frameless Perf-Metal Grilles - ~6" x 9.5"

speaker · 9th April 2006, 05:29 PM

These are black painted, perforated steel grilles. Open area is ~55% and perforation is non-staggered, square. Anything over 50% is virtually acoustically transparent. They have a slight arc to them as seen in the second picture and the edges along the long side it folded over. The cover a ~5 1/4" speaker perfectly and leave room for a tweeter. (Note, in the second image there is a metal tab under the right grille. That is on the passive radiator underneath the grille not part of the grille.) I attached these to my speaker projects with tube stand-offs & screws but you can also use brackets or magnets. These will finish of a DIY speaker project in a very professional manner which is how I used them. They are in perfect cosmetic condition.

$14 / pair via money order & includes US48 shipping.

I have several sets available.

speaker · 10th April 2006, 05:51 PM

If these prices are out of whack, please make offer.

9th April 2006, 05:29 PM	#1
speaker diyAudio Member Join Date: Mar 2004 Location: USA	Frameless Perf-Metal Grilles - ~6" x 9.5" These are black painted, perforated steel grilles. Open area is ~55% and perforation is non-staggered, square. Anything over 50% is virtually acoustically transparent. They have a slight arc to them as seen in the second picture and the edges along the long side it folded over. The cover a ~5 1/4" speaker perfectly and leave room for a tweeter. (Note, in the second image there is a metal tab under the right grille. That is on the passive radiator underneath the grille not part of the grille.) I attached these to my speaker projects with tube stand-offs & screws but you can also use brackets or magnets. These will finish of a DIY speaker project in a very professional manner which is how I used them. They are in perfect cosmetic condition. $14 / pair via money order & includes US48 shipping. I have several sets available.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Vintage" JVC Cassette Deck; metal bias?	Sir Trefor	Analogue Source	15	21st December 2009 11:46 PM
ANY "High-Perf" SIL op-amps to replace NJM5532	homemade	Parts	2	13th December 2006 03:41 AM
PRP - Precision "Metal Film" Resistors	Gooch	Parts	4	8th March 2006 09:30 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th April 2006, 05:51 PM	#2
speaker diyAudio Member Join Date: Mar 2004 Location: USA	If these prices are out of whack, please make offer.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)