• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

TNT Solidphono PCBs

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
D

Devius

Member
Joined 2004
I have a few extra TNT Solidphono PCBs made by myself. If anybody is insterested I have:

- 2 Solidphono second version PSU boards (slightly altered)
- 2 Solidphono Pre-amp boards (for Audyn and Multicap caps, each board is mono)

They are all double sided with the top side acting as shield.

Pictures (only the psu so far) here:

PSU top
PSU bottom

The top copper on these boards was a bit eaten by the etching solution, but it is protected by lacquer so it isn't oxydizing. The PSU boards accept caps of several sizes.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom