18 inch pa drivers WANTED min 400w rms.

Bull · 2nd February 2006, 06:41 PM

I'm looking for a pair of 18 inch drivers and they have to be cheapish[max £200 a pair or less]. Min 400w rms, min 3 inch voicecoil.Has to be 8 ohm drivers too.
Has to be cast frame and have a QTS around 0.20-.0.35 and an xmax over 4mm and a BL over 18.

Eminence Sigma Pro 18, Eminence Omega Pro 18, Fane Collosus 18XB, 18B, Fane Cresendo 18B, Celestion Frontline 18 are the kind of drivers I'm after, or others.

They are for a pair of pa 18 inch reflex bins and the old drivers blew and were too rubbish to recone.So need better 18 inch drivers for the cabs as I use them for discos. The cabs are approx 160 litres and have 2 large 6 inch diameter ports that are 6 inch deep.And cab is tuned to 42hz.

Also you have to be in the UK. I'm not paying expensive costs for carrage from the usa, etc.

316a · 7th February 2006, 01:39 AM

Hi ,
Are Celestion BX18-4085 any use ? I have a pair of these spare , only used for domestic usage

ps I want more than £200 the pair for these by the way but make me an offer

cheers

316a

Bull · 12th February 2006, 01:20 AM

Do you know the TS parameters for them drivers?

316a · 12th February 2006, 07:35 AM

Not to hand but available on the web

cheers

316a

2nd February 2006, 06:41 PM	#1
Bull diyAudio Member Join Date: Oct 2002 Location: ...........	18 inch pa drivers WANTED min 400w rms. I'm looking for a pair of 18 inch drivers and they have to be cheapish[max £200 a pair or less]. Min 400w rms, min 3 inch voicecoil.Has to be 8 ohm drivers too. Has to be cast frame and have a QTS around 0.20-.0.35 and an xmax over 4mm and a BL over 18. Eminence Sigma Pro 18, Eminence Omega Pro 18, Fane Collosus 18XB, 18B, Fane Cresendo 18B, Celestion Frontline 18 are the kind of drivers I'm after, or others. They are for a pair of pa 18 inch reflex bins and the old drivers blew and were too rubbish to recone.So need better 18 inch drivers for the cabs as I use them for discos. The cabs are approx 160 litres and have 2 large 6 inch diameter ports that are 6 inch deep.And cab is tuned to 42hz. Also you have to be in the UK. I'm not paying expensive costs for carrage from the usa, etc.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jaycar 12 inch paper cone WANTED	Moondog55	Swap Meet	2	12th November 2008 04:02 AM
Wanted: 8 inch DVC Woofer pair	MCPete	Swap Meet	5	9th October 2008 02:35 AM
Best 4.5 inch drivers?	jazzbearz	Multi-Way	8	17th January 2005 11:40 PM
Wanted 18 inch Drivers- In India	sonu	Multi-Way	0	9th January 2005 12:35 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th February 2006, 01:39 AM	#2
316a diyAudio Member Join Date: Dec 2002 Location: West London	Hi , Are Celestion BX18-4085 any use ? I have a pair of these spare , only used for domestic usage ps I want more than £200 the pair for these by the way but make me an offer cheers 316a

12th February 2006, 01:20 AM	#3
Bull diyAudio Member Join Date: Oct 2002 Location: ...........	Do you know the TS parameters for them drivers?

12th February 2006, 07:35 AM	#4
316a diyAudio Member Join Date: Dec 2002 Location: West London	Not to hand but available on the web cheers 316a

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)