Drivers for sale in SYDNEY - diyAudio
Go Back   Home > Forums > Commercial Sector > Swap Meet

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 26th January 2006, 10:08 AM   #1
JohnR is offline JohnR  Australia
diyAudio Member
 
Join Date: Dec 2001
Location: Steak and Kidney
Default Drivers for sale in SYDNEY

Hi, I thought I might post these here first. I need to sell a good number of DIY bits and pieces... Drivers are located in Sydney Australia. I *think* the prices are fair, but if not please let me know why not if/when you make a lower offer... (Folks in the US please remember that Aussies often get a pretty big hit on shipping when buying from overseas and that these prices have that cost factored in...)

I'm happy to ship overseas but this is only likely to be worthwhile for lighter items.
I'm located in the Northern Beaches of Sydney if you are interested in pickup and/or inspection. All prices are in Australian dollars. OK, here goes...

* Newform Research R15 ribbon tweeters. Never built into a speaker. This is a 15" ribbon driver, about 86 dB/W/m, I will dig up the specs on request. Would make a nice compact full-range speaker if paired with the Adire Extremis. A$200 for the pair (originally US$460, I believe), a bargain.

* Bohlender-Graebener Neo 8 drivers. Lightly used in prototypes, never soldered. A$200 for a set of four, total 8 available.

* Lambda Acoustics TD15M. This one hurts. Never used, great 98 dB/W/m 15" driver with response up to 4k, asking A$600 for the pair. Specs on request.

* Tangband W3-393s 3" full-range driver, A$50 for a set of four.

* Tangband W3-881s 3" full-range driver, one unused pair and one used pair, A$35 for all four.

* Aurasound 1" drivers, see Madisound catalog for info, never used, A$25 pair.

* Aurasound 3" drivers, see Madisound catalog for info, never used, A$50 pair. (Madisound shows a black cone, these have a silver one.)

* Vifa 4 1/5" drivers, I will dig up the specs on these but they are a paper cone driver with response up to several kHz and will produce bass to 50 Hz in a reasonably small ported box. Never used, A$200 for a box of 20, great for a short line array for home theater (that was the plan, anyway...). WILL NOT SHIP this one, pickup only.

Whew. I'll look around tomorrow and see if there's anything else. Thanks

JohnR
  Reply With Quote
Old 26th January 2006, 11:25 AM   #2
JohnR is offline JohnR  Australia
diyAudio Member
 
Join Date: Dec 2001
Location: Steak and Kidney
In case anyone sent me a message, I had an old email address registered and have now updated it. My apologies, please send again if you sent something earlier...
  Reply With Quote
Old 26th January 2006, 01:40 PM   #3
muhy3 is offline muhy3  Australia
diyAudio Member
 
Join Date: Jul 2004
Location: Sydney, Australia
Hi,

I am very much interested in purchasing either of the Tangbands, however I was unable to find datasheets. I am hoping you have the data and perhaps a picture of the driver. These would go well in some full-range.

P.S. I couldn't email you as it wouldn't allow me in the profile. Thanks!
__________________
There used to be a time, when penguins filled the sky!
  Reply With Quote
Old 26th January 2006, 01:56 PM   #4
JohnR is offline JohnR  Australia
diyAudio Member
 
Join Date: Dec 2001
Location: Steak and Kidney
Hi, I have all the messaging options turned on so I don't know what's up with that! Never mind, I will try sending you a message in a second. Here's the data on the first set of Tangbands:

http://www.partsexpress.com/pe/pshow...number=264-809

I apologize, I wrote W3-393S, it should be W3-593S. Here is some data for the second set. PE now show it as a W3-881SD instead of a W3-881S, but it's the same part number?

http://www.partsexpress.com/pe/showd...number=264-812

Hope this helps

JohnR
  Reply With Quote
Old 26th January 2006, 02:01 PM   #5
JohnR is offline JohnR  Australia
diyAudio Member
 
Join Date: Dec 2001
Location: Steak and Kidney
Hm, I boo-booed on the price of the Vifas (and can't edit the original post to correct it). I paid near US$200 shipped so I would like to ask A$200 for them... thanks

JohnR
  Reply With Quote
Old 26th January 2006, 02:22 PM   #6
Brownee is offline Brownee  Australia
diyAudio Member
 
Join Date: Sep 2004
Location: Newcastle
Hi JohnR

I am interesred in your Vifa Drivers for a line array. I don't seem to be able to email you though. How can I contact you?

Thanks
Brownee
  Reply With Quote
Old 26th January 2006, 04:08 PM   #7
JohnR is offline JohnR  Australia
diyAudio Member
 
Join Date: Dec 2001
Location: Steak and Kidney
My bad, I had the options set wrong... there should be an email link at the bottom of this post now. I'll send you a message now as well. Thx
  Reply With Quote
Old 26th January 2006, 07:57 PM   #8
Speakerholic
diyAudio Moderator
 
Cal Weldon's Avatar
 
Join Date: Jan 2004
Location: Near Vancouver
Quote:
Originally posted by JohnR
Hm, I boo-booed on the price of the Vifas (and can't edit the original post to correct it). I paid near US$200 shipped so I would like to ask A$200 for them... thanks
I have changed the original post to A$200. for you.
__________________
Next stop: Margaritaville
Some of Cal's stuff | Cal Weldon Consulting
  Reply With Quote
Old 27th January 2006, 05:50 AM   #9
JohnR is offline JohnR  Australia
diyAudio Member
 
Join Date: Dec 2001
Location: Steak and Kidney
Thanks Cal

Vifas are spoken for!

Some interest in Neo8s in pairs. If you would like just a pair for A$100, no worries. That's about US$75, new price at Parts Express is US$62.68 each. Estimated postage (for a pair): Australia A$6.20 to A$10.75, Asia A$19.50, North America A$23.50, Europe A$28.00. Insurance add A$7.50.

You can convert currencies here: http://www.xe.com/ucc/
  Reply With Quote
Old 27th January 2006, 08:45 AM   #10
Andy G is offline Andy G  Australia
diyAudio Member
 
Andy G's Avatar
 
Join Date: Apr 2002
Location: Newcastle, Australia
Hi John !

This is the reason I DON't visit the "Trading Post" section !!!
Will get back to you once I think of finances.


I had sort of told myslef to put speaker stuff on hold till after i finish this Uni degree at the end of the year !!

  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hi from Sydney brockzila Introductions 3 7th September 2009 09:29 PM
FS: Goodmans 201 drivers. Sydney, Australia Brett Swap Meet 3 21st August 2009 09:17 AM
Ariels for sale, Sydney Australia chrish Swap Meet 1 23rd July 2008 05:39 PM
Amps and drivers FS, pickup only SYDNEY AU JohnR Swap Meet 1 14th May 2008 10:37 AM


New To Site? Need Help?

All times are GMT. The time now is 10:43 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2