• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS $1 speakers

Status
Not open for further replies.
I'll ship these for $4 for the speakers ($1 each and one for free) and $8 for shipping in the 48 states.

Seas H204 3" dome w/ back enclosure
8 ohms
recommended freq range 400-4k
free air resonance 400
operating power 3.2W
characteristic sensitivity 91 db
nominal power 80W
flux density 0.95 T
force factor 4.7 Wb/m
voice coil diameter 76.5 mm
voice coil height 3.0 mm
air gap height 2.0 mm
voice coil resistance 6.4 ohms
effective diaphragm area 55 cm^2
moving mass 3.1 g
air load mass in baffle 0.5 g
weight 0.65 kg
crossover freq 500 hz w/ 12db/oct

Seas H225 3/4" with ferrofluid
8 ohms
recommended freq range 4k-20k
free air resonance 1700 hz
operating power 4.0 W
characteristic sensitivity 90 db
nominal power 80 W
flux density 1.4T
force factor 2.6 Wb/m
voice coil diameter 19.5 mm
voice coil height 1.5 mm
air gap height 2.0 mm
voice coil resistance 6.2 ohms
effective diaphragm area 4 cm^2
moving mass 0.2 g
crossover freq 5000 hz w/ 12db/oct
Qms 1.0
Qes 2.0
Qts 0.7

the odd speaker is marked 53I0CX on the magnet

They all work as tested with a signal generator.

Good candidates for experimenting with no-baffle for time alignment and no baffle step response. Or in a three way system.
The fifth is a good candidate for testing amps before connecting the amp to a more valuable speaker
 

Attachments

  • seassmall0.jpg
    seassmall0.jpg
    93.8 KB · Views: 754
Status
Not open for further replies.