UK: 2 x Seas L22-RNX4/P + 4 x Krell PCB's

ShinOBIWAN · 27th October 2005, 01:35 PM

The last of my clearout:

--------------------------------------------------------------------------

2 x Seas L22-RNX4/P 8.5" Bass drivers

Superb drivers for the money with great definition and clarity.

Originally cost me £67 each about 6 months old with around 150hours use, very carefully looked after from new and in absolutely perfect condition. Come supplied with original reciept.

Data Sheet on Drivers:

http://www.seas.no/seas_line/woofers/H1208.pdf

£65 for the pair

----------------------------------------------------------------------

Krell KSA50 mkII PCB's

Due to the dropping through of a sale my Krell PCB's are back up. Please note if you are overseas I will NOT accept a postal order since this has caused me much grief in the last couple of days!

These are the same boards as per the groupbuy in the 'Krell KSA50 PCB' thread over in the Solid State.

Designed by Pinkmouse (Al) and manufacturer by Advance over in the US. Stunning quality with double sided, solder mask, silk screen and scoring for easy seperation of driver and output boards.

Each board will do a single channel of amplification and since there are 4 boards here that a potential of 4 channels.

I'm looking to recover only my expenses for these boards and I am NOT making any profit on these. I have little time these days and I'm already comfortable with my ESP P101 amps that I was going to replace with the Krells.

Here's a couple of shots of Still4Given's boards with components mounted (Scroll down to bottom of page):

http://www.diyaudio.com/forums/show...5846#post725846

By all accounts from folks who have already built the boards, reports are very good on the sound quality - hardly surprising since this is a Krell!

Bill of Materials(BOM) will be supplied with the boards and the boards are silkscreened with component locations relating to the details within the BOM. Also there is a wealth of advice over in the thread linked to above, so I'm sure someone would help out if you get stuck.

Price per PCB(1 channel) is £15 with a total of 4 available

Email: zeroex_15@hotmail . com

Gavinator68 · 31st October 2005, 05:08 PM

Will you ship to the US and how do I get you the money?

Cheers,

David

Gavinator68 · 31st October 2005, 05:09 PM

Are there any of the chips left as well?

Cheers

ShinOBIWAN · 31st October 2005, 06:20 PM

Nothing left but what you see here.

Will only ship the Krell PCB's overseas.

nicoch58 · 31st October 2005, 07:53 PM

hello, i interested a pair seas, accept paypal ?

manu

ShinOBIWAN · 31st October 2005, 07:55 PM

Quote:

Originally posted by nicoch46
hello, i interested a pair seas, accept paypal ?

manu

Sorry but I won't post the Seas drivers overseas since it would cost a small fortune.

nicoch58 · 31st October 2005, 07:58 PM

I live in italy....

ShinOBIWAN · 31st October 2005, 08:00 PM

Quote:

Originally posted by nicoch46
I live in italy....

What's with the Jamaican flag

I'm still not sure just how much to post to Italy though. The package will be around 7kg.

ShinOBIWAN · 1st November 2005, 07:31 PM

2 x Krell PCB's sold (pending payment)

Only 2 left now so get in quick

ShinOBIWAN · 8th November 2005, 02:30 PM

Looks like the sale on the Krell PCB's has dropped through since I haven't heard anything from the buyer.

So everything still for sale.

2 x Seas L22-RNX4/P reduced to £50!

Krell PCB's reduced to £10 each

27th October 2005, 01:35 PM	#1
ShinOBIWAN diyAudio Member Join Date: Feb 2004 Location: UK	UK: 2 x Seas L22-RNX4/P + 4 x Krell PCB's The last of my clearout: -------------------------------------------------------------------------- 2 x Seas L22-RNX4/P 8.5" Bass drivers Superb drivers for the money with great definition and clarity. Originally cost me £67 each about 6 months old with around 150hours use, very carefully looked after from new and in absolutely perfect condition. Come supplied with original reciept. Data Sheet on Drivers: http://www.seas.no/seas_line/woofers/H1208.pdf £65 for the pair ---------------------------------------------------------------------- Krell KSA50 mkII PCB's Due to the dropping through of a sale my Krell PCB's are back up. Please note if you are overseas I will NOT accept a postal order since this has caused me much grief in the last couple of days! These are the same boards as per the groupbuy in the 'Krell KSA50 PCB' thread over in the Solid State. Designed by Pinkmouse (Al) and manufacturer by Advance over in the US. Stunning quality with double sided, solder mask, silk screen and scoring for easy seperation of driver and output boards. Each board will do a single channel of amplification and since there are 4 boards here that a potential of 4 channels. I'm looking to recover only my expenses for these boards and I am NOT making any profit on these. I have little time these days and I'm already comfortable with my ESP P101 amps that I was going to replace with the Krells. Here's a couple of shots of Still4Given's boards with components mounted (Scroll down to bottom of page): http://www.diyaudio.com/forums/show...5846#post725846 By all accounts from folks who have already built the boards, reports are very good on the sound quality - hardly surprising since this is a Krell! Bill of Materials(BOM) will be supplied with the boards and the boards are silkscreened with component locations relating to the details within the BOM. Also there is a wealth of advice over in the thread linked to above, so I'm sure someone would help out if you get stuck. Price per PCB(1 channel) is £15 with a total of 4 available Email: zeroex_15@hotmail . com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seas 27TDFC H1189 vs Seas 27TFFC H881	ermes	Multi-Way	4	19th April 2011 01:20 PM
Wanted: Seas W17EX001, Usher 8945P, Seas CA18, or somewhat similar mid-woofer.	Spasticteapot	Swap Meet	2	7th March 2007 04:06 PM
Seas Millenium tweeters and Seas W22EX-001	sephiroth619	Swap Meet	2	5th March 2007 06:34 AM
UK: 4 x Seas L22 RNX4/P Drivers with Cabinets	ShinOBIWAN	Swap Meet	19	8th August 2005 10:21 PM
Seas Excel W26 compaired to Seas L26 (10")	harruharru	Subwoofers	9	11th March 2005 09:47 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

31st October 2005, 05:08 PM	#2
Gavinator68 diyAudio Member Join Date: Mar 2004 Location: Cleveland, OH	Will you ship to the US and how do I get you the money? Cheers, David

31st October 2005, 05:09 PM	#3
Gavinator68 diyAudio Member Join Date: Mar 2004 Location: Cleveland, OH	Are there any of the chips left as well? Cheers

31st October 2005, 06:20 PM	#4
ShinOBIWAN diyAudio Member Join Date: Feb 2004 Location: UK	Nothing left but what you see here. Will only ship the Krell PCB's overseas.

31st October 2005, 07:53 PM	#5
nicoch58 diyAudio Member Join Date: Oct 2004	hello, i interested a pair seas, accept paypal ? manu

31st October 2005, 07:58 PM	#7
nicoch58 diyAudio Member Join Date: Oct 2004	I live in italy....

1st November 2005, 07:31 PM	#9
ShinOBIWAN diyAudio Member Join Date: Feb 2004 Location: UK	2 x Krell PCB's sold (pending payment) Only 2 left now so get in quick

8th November 2005, 02:30 PM	#10
ShinOBIWAN diyAudio Member Join Date: Feb 2004 Location: UK	Looks like the sale on the Krell PCB's has dropped through since I haven't heard anything from the buyer. So everything still for sale. 2 x Seas L22-RNX4/P reduced to £50! Krell PCB's reduced to £10 each