Go Back   Home > Forums > Commercial Sector > Swap Meet

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 25th October 2005, 09:53 PM   #1
cowanrg is offline cowanrg  United States
diyAudio Member
 
cowanrg's Avatar
 
Join Date: Apr 2002
Location: Lafayette, CO
Send a message via AIM to cowanrg
Default FS: BOX of MOX! tons of stuff!

so, im trying to clean up my shop and get rid of projects im not going to go forward with. The mox is the first thing to go. This is the v1.1 i think. its the original one with all the adjustments and settings.

here is what it includes:

2 mox boards, one almost fully populated (i didnt do ALL resistor values), but i did do all the caps (multipliers?). all headers are in there, sockets for opamps, and headers for inputs, power supply, etc. its missing a few things because i built it to my specs, but its not like you cant put it back in. im missing a few caps on the input, you can see from the photos later. BUT, all resistors are dale/vishays, all multiplier caps are wimas, and it even has the 1uf caps too. one board is almost fully stuffed, as i said, and the other isnt started at all, its completely blank.

6 discrete dual opamps. i built 6 of these discrete opamps, but ran out of parts building the last two. the last two are half-populated, but i am missing a few small parts. they were also built with dale/vishay resistors and higher quality parts. They have right-angle gold headers installed in the completed ones. I have all the "hardware" parts for the uncompleted ones (screws, standoffs, right-angle headers). i forgot what they are missing, i would have to look it up. ask me and i can figure it out.

but wait, there's more! i have enough parts and pieces to stuff the second board (not fully, as i said before, i was missing a few parts, and didnt buy ALL the resistor values...), headers, connectors, caps, resistors, etc. are all included. I even have the plugs that would attach to the boards inputs AND the unterminated pins that you need for the connectors.

also, i went and bought opamps for the boards just in case the discrete's didnt work, and just for testing against the discretes too. its nice to have a backup plan just in case. so, i have 10 NE5532P dual opamps too.

there is a ton of parts here, certainly enough to get you going. for a normal 2-way design, you should have all the values you need to get it running, except for a few parts here and there. all you need to do is add a power supply.

im not sure what to charge here. the boards were around $30 with shipping i guess. at least thats what the site shows ($8 for each mox, $5 for a set of 4 dual opamps), plus shipping. the parts were around $50 for resistors, caps, etc. The opamps were around $10 for the 10 of them, factor in all the jumpers (i have tons of them), headers, hardware, etc, and its another $50 or more. there was a lot of work tracking things down too. just look at the pictures and make me an offer, either through the forum, or through my email. thanks!
Attached Images
File Type: jpg mox1.jpg (46.5 KB, 691 views)
  Reply With Quote
Old 25th October 2005, 09:59 PM   #2
cowanrg is offline cowanrg  United States
diyAudio Member
 
cowanrg's Avatar
 
Join Date: Apr 2002
Location: Lafayette, CO
Send a message via AIM to cowanrg
Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.
Attached Images
File Type: jpg mox6.jpg (20.2 KB, 527 views)
  Reply With Quote
Old 25th October 2005, 10:01 PM   #3
cowanrg is offline cowanrg  United States
diyAudio Member
 
cowanrg's Avatar
 
Join Date: Apr 2002
Location: Lafayette, CO
Send a message via AIM to cowanrg
sorry for dialup guys.

i should add shipping info. i will ship anywhere, within reason of course. its pretty light, and fits in a small box, so it should be cheap, like $10-$15 in the US, and who knows how much outside of US, i could estimate it. or, you can use my zip code, 80516 to estimate it. weight is 2 pounds max.
  Reply With Quote
Old 9th November 2005, 05:25 AM   #4
cowanrg is offline cowanrg  United States
diyAudio Member
 
cowanrg's Avatar
 
Join Date: Apr 2002
Location: Lafayette, CO
Send a message via AIM to cowanrg
no one? was "name your price" too high?! there must be someone that missed out the first mox group buy that wants this.
  Reply With Quote
Old 10th November 2005, 01:13 AM   #5
diyAudio Member
 
Join Date: Mar 2004
Location: Arkansas
Default ??

I've got a spare $30 bill... but I was afraid it might insult you.
No offense... it's just all I can swing right now.
Got a link for the mox project?
__________________
Writing is good exercize for the texticles!
  Reply With Quote
Old 18th November 2005, 01:10 AM   #6
cowanrg is offline cowanrg  United States
diyAudio Member
 
cowanrg's Avatar
 
Join Date: Apr 2002
Location: Lafayette, CO
Send a message via AIM to cowanrg
SOLD!

thanks Illusus!
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
spring cleaning FREE STUFF just pay shipping plus wtb/wtt ibook stuff relientk4life06 Swap Meet 3 24th May 2006 03:32 AM
Estate sale......tons o'stuff.......... Jocko Homo Swap Meet 19 29th February 2004 04:09 PM


New To Site? Need Help?

All times are GMT. The time now is 07:44 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2