<*>
So I'm officially getting out off DIY for the time being. Time to focus on graduating from College and Getting a job. Too much stuff and no place to put it. Take this stuff off my hands and I won't have to look at it and think how much fun it would be to use it. Shipping is additional in each case, and the prices are fair and reasonably firm. Order a bunch of stuff and we can work out a deal.
8 x XLR to RCA interconnects
All of these IC's are made using Dayton locking RCA's and Neutrik XLR plugs (don't remember which line). The cable is Beldin Cat 5 cable, don't remember which kind on that either, but it's the good stuff, and one that was recommended on the forums for IC use. Pin 1 and 3 aree connected on all of these, but I'll be happy to change that if you'd like. Silver solder and all that, the culmination of hours of researching IC's. Nicely covered in Tekflex, they look very upscale.
$20 for a stereo pair plus shipping
Buy them all and shipping is free.
There are:
2 male XLR to RCA approx. 1.5ft in length
6 female XLR to RCA
4 - 1.5ft in length
2 - .75ft in length
Just enough to connect all the in's and out's of a DCX 2496, hint hint.
http://web.engr.oregonstate.edu/~strong/ForSale/RCAend.JPG
http://web.engr.oregonstate.edu/~strong/ForSale/XLRFemale1.JPG
http://web.engr.oregonstate.edu/~strong/ForSale/XLRMale.JPG
http://web.engr.oregonstate.edu/~strong/ForSale/XLRtoRCAall2.JPG
Behringer Ultra Drive Pro DCX-2496
We all know what this one is. It's got maybe 10 hours on it on the high end. Barely scrathed the surface of what it can do. Not a scratch on it.
Take it for $215
http://web.engr.oregonstate.edu/~strong/ForSale/DCX2496.JPG
http://web.engr.oregonstate.edu/~strong/ForSale/DCX2496face.JPG
http://web.engr.oregonstate.edu/~strong/ForSale/DCX2496serial.JPG
Creative Sounds WR125's
Once again, these need no introduction. Less than an hour of play time, they've rarely been out of the box. Absolute perfect shape.
$100
http://web.engr.oregonstate.edu/~strong/ForSale/WR125.JPG
Aurum Cantus G2si tweeters
Bought used off of this forum, I haven't had a chance to really use them at all. I did buy some caps to put on the input to protect them from DC. They will be included.
$125
http://web.engr.oregonstate.edu/~strong/ForSale/ACG2si.JPG
(Sorry for the blurry picture, you get the idea though.)
Dayton Reference RS225 8" drivers
Fantastic drivers, that I once again never got a chance to use. I don't believe this pair has ever even seem power. As beautiful as the day I opened the boxes.
$80
http://web.engr.oregonstate.edu/~strong/ForSale/Dayton.JPG
B&K VMR 654 6 channel Amp
I just bought this from Bill F. about a month ago. Really a beautiful amp that sounds fantastic. 6x60 into 8 ohms. It kept up nicely with the pair of Bryston's I ran it alongside. Huge supply caps, and in general over built. Gain control for all 6 channels on the back.
$250
http://web.engr.oregonstate.edu/~strong/ForSale/VMR654.JPG
MB Quart MusicComp 3 way Passive Crossovers
I have no info on these, and cannot tell you where the crossover points are or what drivers they go with. I know they're expensive to replace and, I believe, came with the premium line 3 way set.
$35
http://web.engr.oregonstate.edu/~strong/ForSale/MusiComp
2 yards of Black Grill Cloth
Had it sitting around forever, and have used bits and pieces, but for the most part it's hole. Nice dark black, and as far as I can tell doesn't change the sound of a speaker.
$5 or Free with an order over $200
http://web.engr.oregonstate.edu/~strong/ForSale/GrillCloth.JPG
80 x #6 x3/4" Security Allen screws with bit
These little ******s are expensive at .25 a piece from parts express. I even bought the bit to go with them.
$10 (that's half price!!!) or free with an order over $400
2 x Alpine 3545 Digimax Amps
Old school Alpine Power. Probably some of the nicest high power car audio amps around. 250x2 into 4 ohms or 1000x1 at 4 ohms. Highly underrated. A little rough cosmetically, but they sound oh so sweet.
$250 each
or $475 together
http://web.engr.oregonstate.edu/~strong/ForSale/Alpine
Phaze Audio TD1250 Tube Driver board
250W mono tube hybrid car amp. Just the board and it does not work. I've been told it's a very very easy fix, but I don't know what it is. These are rare as hell, and supposedly sound very nice. It's pretty to look at if nothing else
$30
Okay, I think that's everything I've got. I'll add more if I find it. I've got all sorts of references and stuff. Happy to take paypal for a 1.5% fee.
Cheers
-Steve
So I'm officially getting out off DIY for the time being. Time to focus on graduating from College and Getting a job. Too much stuff and no place to put it. Take this stuff off my hands and I won't have to look at it and think how much fun it would be to use it. Shipping is additional in each case, and the prices are fair and reasonably firm. Order a bunch of stuff and we can work out a deal.
8 x XLR to RCA interconnects
All of these IC's are made using Dayton locking RCA's and Neutrik XLR plugs (don't remember which line). The cable is Beldin Cat 5 cable, don't remember which kind on that either, but it's the good stuff, and one that was recommended on the forums for IC use. Pin 1 and 3 aree connected on all of these, but I'll be happy to change that if you'd like. Silver solder and all that, the culmination of hours of researching IC's. Nicely covered in Tekflex, they look very upscale.
$20 for a stereo pair plus shipping
Buy them all and shipping is free.
There are:
2 male XLR to RCA approx. 1.5ft in length
6 female XLR to RCA
4 - 1.5ft in length
2 - .75ft in length
Just enough to connect all the in's and out's of a DCX 2496, hint hint.
http://web.engr.oregonstate.edu/~strong/ForSale/RCAend.JPG
http://web.engr.oregonstate.edu/~strong/ForSale/XLRFemale1.JPG
http://web.engr.oregonstate.edu/~strong/ForSale/XLRMale.JPG
http://web.engr.oregonstate.edu/~strong/ForSale/XLRtoRCAall2.JPG
Behringer Ultra Drive Pro DCX-2496
We all know what this one is. It's got maybe 10 hours on it on the high end. Barely scrathed the surface of what it can do. Not a scratch on it.
Take it for $215
http://web.engr.oregonstate.edu/~strong/ForSale/DCX2496.JPG
http://web.engr.oregonstate.edu/~strong/ForSale/DCX2496face.JPG
http://web.engr.oregonstate.edu/~strong/ForSale/DCX2496serial.JPG
Creative Sounds WR125's
Once again, these need no introduction. Less than an hour of play time, they've rarely been out of the box. Absolute perfect shape.
$100
http://web.engr.oregonstate.edu/~strong/ForSale/WR125.JPG
Aurum Cantus G2si tweeters
Bought used off of this forum, I haven't had a chance to really use them at all. I did buy some caps to put on the input to protect them from DC. They will be included.
$125
http://web.engr.oregonstate.edu/~strong/ForSale/ACG2si.JPG
(Sorry for the blurry picture, you get the idea though.)
Dayton Reference RS225 8" drivers
Fantastic drivers, that I once again never got a chance to use. I don't believe this pair has ever even seem power. As beautiful as the day I opened the boxes.
$80
http://web.engr.oregonstate.edu/~strong/ForSale/Dayton.JPG
B&K VMR 654 6 channel Amp
I just bought this from Bill F. about a month ago. Really a beautiful amp that sounds fantastic. 6x60 into 8 ohms. It kept up nicely with the pair of Bryston's I ran it alongside. Huge supply caps, and in general over built. Gain control for all 6 channels on the back.
$250
http://web.engr.oregonstate.edu/~strong/ForSale/VMR654.JPG
MB Quart MusicComp 3 way Passive Crossovers
I have no info on these, and cannot tell you where the crossover points are or what drivers they go with. I know they're expensive to replace and, I believe, came with the premium line 3 way set.
$35
http://web.engr.oregonstate.edu/~strong/ForSale/MusiComp
2 yards of Black Grill Cloth
Had it sitting around forever, and have used bits and pieces, but for the most part it's hole. Nice dark black, and as far as I can tell doesn't change the sound of a speaker.
$5 or Free with an order over $200
http://web.engr.oregonstate.edu/~strong/ForSale/GrillCloth.JPG
80 x #6 x3/4" Security Allen screws with bit
These little ******s are expensive at .25 a piece from parts express. I even bought the bit to go with them.
$10 (that's half price!!!) or free with an order over $400
2 x Alpine 3545 Digimax Amps
Old school Alpine Power. Probably some of the nicest high power car audio amps around. 250x2 into 4 ohms or 1000x1 at 4 ohms. Highly underrated. A little rough cosmetically, but they sound oh so sweet.
$250 each
or $475 together
http://web.engr.oregonstate.edu/~strong/ForSale/Alpine
Phaze Audio TD1250 Tube Driver board
250W mono tube hybrid car amp. Just the board and it does not work. I've been told it's a very very easy fix, but I don't know what it is. These are rare as hell, and supposedly sound very nice. It's pretty to look at if nothing else
$30
Okay, I think that's everything I've got. I'll add more if I find it. I've got all sorts of references and stuff. Happy to take paypal for a 1.5% fee.
Cheers
-Steve
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.