• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Zen v1 board, stuffed.

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
steenoe

steenoe

Member
Joined 2004
The components are: Fets are IRF's, (as they should be), all resistors are metalfilm, mostly Phillips/Vishay. PSU elctrolytics are Nippon Chemicon, psu bypass and input caps are Black Gates. The output electrolytics are bypassed with Panasonic filmcaps, (underneath the board). The amp sounds pretty good;)

Steen:)

Ps. As you can see everything is still soldered to the board.
 

Attachments

  • zv1_board.jpg
    zv1_board.jpg
    53.4 KB · Views: 403
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom