MF30-2F-151.5 heatsink

rlim · 25th September 2002, 03:33 PM

Hi, I am able to get this nice heatsink (see below) for US$35 shipped from Australia to my home in Colorado 80526, and I was wondering if there are any interested parties out there. You will have to pay shipping from Fort Collins, CO 80526 using

http://www.ups.com

Estimated dimensions are 15" (L) by 10" (W) by 10" (H). Weight is 5.5lb.

The specs are attached to the next thread.....Richard

rlim · 25th September 2002, 03:51 PM

Please let me know by September 29th. I would prefer payment via paypal but money orders or cashiers checks are fine too. ....Richard

Jean · 25th September 2002, 10:41 PM

I'll take a pair!

Tony D. · 26th September 2002, 01:18 AM

Hi Richard,

Thanks for the offer. I will take two pairs, 4 total sinks.

Tony D.

Tony D. · 26th September 2002, 01:29 AM

By the way, the dimensions in the spec sheet you have attached are not very clear. If I am reading them correctly they are: 294L X 77D X 151H, correct?

Tony D.

Peter Daniel · 26th September 2002, 02:26 AM

Any chance to get the boards with the heatsinks?

I knew I've seen them before Another Aleph5

ThingyNess · 26th September 2002, 02:31 AM

Tony - you never got back to me after I e-mailed you before about the MECI sinks.

I'm thinking of ordering a pair for myself too - would you be interested in splitting the shipping, seeing as we're both here in Vancouver?

It'd be cheaper for both of us that way.

rlim · 26th September 2002, 02:56 AM

Hi Tony,

The dimensions are 300mm (L) by 81mm (W), and it's 151.5mm high.

Looks like we currently have interest for 8 pieces. I'll get back to you guys on the 29th since I'm going to be out of town attending a wedding......

Talk to ya later,
Richard

rlim · 26th September 2002, 03:00 AM

Hi Peter,

I actually stole the picture from Mark Finnis to show the heatsink. You will have to contact him for boards.

Richard

Tony D. · 26th September 2002, 03:29 AM

Hi ThingyNess,

Sorry about not getting back to you. Actually I am going to have the sinks delivered to my mail box in Blaine which makes shipping and customs issues a lot easier.

Not to mention the fact that UPS from the US to Canada is a nightmare.

You are welcome to include your sink order with mine and I will collect the sinks, do customs and bring them to Vancouver where you can pick them up at my house as I am doing this any way and it is no big deal to take care of yours as well.

Tony D.

26th September 2002, 02:26 AM	#6
Peter Daniel diyAudio Member Join Date: Jul 2002 Location: Toronto, Canada	Any chance to get the boards with the heatsinks? I knew I've seen them before Another Aleph5 __________________ www.audiosector.com “Do something really well. See how much time it takes. It might be a product, a work of art, who knows? Then give it away cheaply, just because you feel that it should not cost so much, even if it took a lot of time and expensive materials to make it.” - JC

26th September 2002, 02:56 AM	#8
rlim diyAudio Member Join Date: Jul 2002 Location: USA	MF30-2F-151.5 dimensions Hi Tony, The dimensions are 300mm (L) by 81mm (W), and it's 151.5mm high. Looks like we currently have interest for 8 pieces. I'll get back to you guys on the 29th since I'm going to be out of town attending a wedding...... Talk to ya later, Richard

26th September 2002, 03:00 AM	#9
rlim diyAudio Member Join Date: Jul 2002 Location: USA	boards? Hi Peter, I actually stole the picture from Mark Finnis to show the heatsink. You will have to contact him for boards. Richard

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Heatsink...	Lewis Moon	Chip Amps	8	26th November 2008 07:22 PM
Heatsink for the F3	lordvader	Pass Labs	2	9th July 2008 01:53 AM
ZV9 Heatsink	dviswa	Pass Labs	9	28th July 2006 01:43 AM
Conrad MF30-75 Heatsink (i.e. For Dynahi, etc.)	dgardner	Group Buys	3	21st December 2005 04:40 AM
Getting the famous MF30 heatsink?	dantwomey	Pass Labs	28	10th November 2002 03:09 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th September 2002, 10:41 PM	#3
Jean diyAudio Member Join Date: Mar 2002 Location: Sacramento, CA	I'll take a pair!

26th September 2002, 01:18 AM	#4
Tony D. diyAudio Member Join Date: Feb 2001 Location: Vancouver, B.C., Canada	Hi Richard, Thanks for the offer. I will take two pairs, 4 total sinks. Tony D.

26th September 2002, 01:29 AM	#5
Tony D. diyAudio Member Join Date: Feb 2001 Location: Vancouver, B.C., Canada	By the way, the dimensions in the spec sheet you have attached are not very clear. If I am reading them correctly they are: 294L X 77D X 151H, correct? Tony D.

26th September 2002, 02:31 AM	#7
ThingyNess diyAudio Member Join Date: Feb 2002 Location: Vancouver, BC, Canada	Tony - you never got back to me after I e-mailed you before about the MECI sinks. I'm thinking of ordering a pair for myself too - would you be interested in splitting the shipping, seeing as we're both here in Vancouver? It'd be cheaper for both of us that way.

26th September 2002, 03:29 AM	#10
Tony D. diyAudio Member Join Date: Feb 2001 Location: Vancouver, B.C., Canada	Hi ThingyNess, Sorry about not getting back to you. Actually I am going to have the sinks delivered to my mail box in Blaine which makes shipping and customs issues a lot easier. Not to mention the fact that UPS from the US to Canada is a nightmare. You are welcome to include your sink order with mine and I will collect the sinks, do customs and bring them to Vancouver where you can pick them up at my house as I am doing this any way and it is no big deal to take care of yours as well. Tony D.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read