FS: SMPS 50-0-50 regulated DC - diyAudio
Go Back   Home > Forums > Commercial Sector > Swap Meet

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th July 2005, 01:43 AM   #1
Bent is offline Bent  Australia
diyAudio Member
 
Join Date: Jun 2004
Location: Perth, Australia
Default FS: SMPS 50-0-50 regulated DC

Hi,

I have 10 amplifier SMPS's for sale. I would use them except they are 110vAC and I am in Australia :-( where the voltage is 240vAC

50-0-50v DC @ at least 3.5 amps continuous, but these were made for a 4 ohm Class AB subwoofer rated at 180wRMS so there is plenty of current potential. They are regulated and rock solid on their voltage when at 3.5 amp load.

There is also a 2 amp current limited supply at 25-0-25v DC.

They are built by ALESIS for audio, so be quick, they are really nice.

Oh, US$60/ea delivered worldwide anywhere! that is definately a bargain - they are new also!

Cheers, Graeme (graemebentink@rockeng.com.au)
  Reply With Quote
Old 29th July 2005, 06:50 AM   #2
Bent is offline Bent  Australia
diyAudio Member
 
Join Date: Jun 2004
Location: Perth, Australia
No takers? I am surprised, these are really great items

Is the price too high or too low? seems like a good deal to me.

I am open to hearing offers.

Best, Graeme
  Reply With Quote
Old 29th July 2005, 12:57 PM   #3
diyAudio Member
 
Jan Dupont's Avatar
 
Join Date: Apr 2003
Location: Copenhagen, Denmark
Send a message via MSN to Jan Dupont
Do you have a picture
__________________
Free Schematic and Service Manual downloads www.audio-circuit.dk, Company: www.dupont-audio.com, Joint venture: www.DupontMantra.com
  Reply With Quote
Old 1st August 2005, 01:36 AM   #4
Bent is offline Bent  Australia
diyAudio Member
 
Join Date: Jun 2004
Location: Perth, Australia
Hi, I guess that is a fairly good idea.

The SMPS is physically small which is great!

About 15cm x 8cm x 7cm at a guess.

please see attached picture
Attached Images
File Type: jpg audiosmpssmall.jpg (55.6 KB, 279 views)
  Reply With Quote
Old 1st August 2005, 02:05 AM   #5
Eva is offline Eva  Spain
diyAudio Member
 
Eva's Avatar
 
Join Date: Oct 2003
Location: Near the sea
Send a message via MSN to Eva
This SMPS looks like the classic half bridge used in AT and ATX PC PSUs. In other words: There may be a way to wire it for 240V operation.
  Reply With Quote
Old 2nd August 2005, 03:37 AM   #6
Bent is offline Bent  Australia
diyAudio Member
 
Join Date: Jun 2004
Location: Perth, Australia
Hi Eva,

Thanks for that info.

I would like nothing more than to set it up for 240v operation, unfortunately my understanding ofb the SMPS is not enough.

Maybe I will look for a hualf bridge circuit and compare.

Many thanks, Graeme
  Reply With Quote
Old 2nd August 2005, 03:46 AM   #7
Eva is offline Eva  Spain
diyAudio Member
 
Eva's Avatar
 
Join Date: Oct 2003
Location: Near the sea
Send a message via MSN to Eva
If I'm right about the circuit, then it can be configured for 115V or 230V operation depening on how the diode bridge (that four-legged thing in the left side of the heatsink) and those two big capacitors are wired.

Click the image to open in full size.

This is a typical schematic showing 115V/230V selection. The "input filter" is inside that steel or iron box in the left side. D21, D22, D23 and D24 constitute the diode bridge. C5 and C6 are those two big capacitors. You may even find a PCB jumper for voltage selection in place of the switch shown in the schematic.
  Reply With Quote
Old 25th August 2005, 08:08 AM   #8
Bent is offline Bent  Australia
diyAudio Member
 
Join Date: Jun 2004
Location: Perth, Australia
Default Thanks eva

Thanks for your advice, the SMPS indeed does run on 110v fine - even when on the 240v setting!

I have re posted them for sale.

Mains caps are 350v @ 1200uF, pretty good!

Thanks again, Graeme
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
5V out of 12V regulated DECKY999 Power Supplies 0 7th April 2008 05:37 AM
Regulated or non-regulated SMPS longitude Class D 5 8th May 2007 03:02 PM
SMPS regulated output MaXiZ Power Supplies 1 24th December 2005 08:10 AM
SMPS Power supply 350W 100v CT Regulated Bent Swap Meet 0 25th August 2005 07:57 AM
Regulated PSU PCB D_GR8_1 Chip Amps 45 11th December 2004 05:30 AM


New To Site? Need Help?

All times are GMT. The time now is 07:51 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2