• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

diy projector - psone lcd + hqi150w + varifocal 285-330 mm

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
alapimba

alapimba

Member
Joined 2004
hello,
This way has i have it now i guess you wont be able to power it up at 120v but i guess if you change the ballast and ignitor that power up the lamp then everything will be ok.
The ballast and the ignitor is cheap, it's about $15 USD.
If you want you can do it the simplest way, buying a 120v to 220 v converter and than plug to the projector.

Much simpler if you don't want to touch the insides of the projector :)
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom