• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

2*1500W amp for sale

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
P

Pafi

Member
Joined 2004
snyaudio.hu/spafi/
(Is it allowed to advertise here? I have completely run out of money. :cannotbe: )

It is a dual mono 3 level Class D power amp with 50 Hz toroidal transformators. Has simmetrical XLR inputs, it produces 1500 W unclipped sinus power at 2,66 load impedance.

Amp:

full bridge, 8 pcs of FDP2552 in each chanel (150V 36mOhm), seperate common mode and differential mode output filter chokes (cold operation), overcurrent sensing depending on chip temperature (approx. 90 A at cold FETs, 60 A at 100 celsius chip), auto-reset with ~1s period. Max output voltage: Vdd-2V.

Bandwidth: 15Hz-30kHz (+0,5/-3dB), S/N aprox. 110 dB (based on hearing tests), distortion: tbd. Effective carrier freq: 370 kHz. Residual carrier: ~300 mVeff at no drive, ~1,5V at half drive.

Supply:
soft-start, 1 ohm primer impedance trafo with 2*46VAC (128VDC) output, summa 19000 uF 200 V Nippon Chemicon elkos.

+ small signal supplies stabilised, power on sequence ensured by logic.

Photos:
http://www.hszk.bme.hu/~sp215/PWM_2kW/front2.jpg
http://www.hszk.bme.hu/~sp215/PWM_2kW/inside.jpg
http://www.hszk.bme.hu/~sp215/PWM_2kW/LEDs.jpg

Output power and waveform:
http://www.hszk.bme.hu/~sp215/PWM_2kW/354.jpg
http://www.hszk.bme.hu/~sp215/PWM_2kW/350.jpg

Weight: 21 kg, height: 88 mm.

Location: Budapest, Hungary

If you have comments, questions, price-advising, please write to spafi(at)aramszu.net!
 
merlin el mago

merlin el mago

Member
Joined 2009
Paid Member
Your links doesn't work.


Pafi said:
(Is it allowed to advertise here? I have completely run out of money. :cannotbe: )

It is a dual mono 3 level Class D power amp with 50 Hz toroidal transformators. Has simmetrical XLR inputs, it produces 1500 W unclipped sinus power at 2,66 load impedance.

Amp:

full bridge, 8 pcs of FDP2552 in each chanel (150V 36mOhm), seperate common mode and differential mode output filter chokes (cold operation), overcurrent sensing depending on chip temperature (approx. 90 A at cold FETs, 60 A at 100 celsius chip), auto-reset with ~1s period. Max output voltage: Vdd-2V.

Bandwidth: 15Hz-30kHz (+0,5/-3dB), S/N aprox. 110 dB (based on hearing tests), distortion: tbd. Effective carrier freq: 370 kHz. Residual carrier: ~300 mVeff at no drive, ~1,5V at half drive.

Supply:
soft-start, 1 ohm primer impedance trafo with 2*46VAC (128VDC) output, summa 19000 uF 200 V Nippon Chemicon elkos.

+ small signal supplies stabilised, power on sequence ensured by logic.

Photos:
http://www.hszk.bme.hu/~sp215/PWM_2kW/front2.jpg
http://www.hszk.bme.hu/~sp215/PWM_2kW/inside.jpg
http://www.hszk.bme.hu/~sp215/PWM_2kW/LEDs.jpg

Output power and waveform:
http://www.hszk.bme.hu/~sp215/PWM_2kW/354.jpg
http://www.hszk.bme.hu/~sp215/PWM_2kW/350.jpg

Weight: 21 kg, height: 88 mm.

Location: Budapest, Hungary

If you have comments, questions, price-advising, please write to spafi(at)aramszu.net!
Click to expand...
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom