FS 6ch chip amp

fcserei · 28th February 2005, 01:35 AM

For sale a 6 channel chip amp. Basically it is a revived and cleaned up ELAN amp.
It has 6 channels of LM3886 in a straight textbook 20 dB gain non inverting circuits with Zobel on the output. Around 60W/channel.
The chassis itself is very decorative, 1U high with heatsinks on both sides. Speaker binding posts are substantial gold plated 5 ways.
The original PS had a short and burned out the low voltage section. I've reused the +-31V section, the power transformer and the power amp boards, removed all the buffering and bridging circuits. The transformer is a 420 VA toroid, the capacitor bank is 40000 uf.

$70

fcserei · 28th February 2005, 01:36 AM

Inside

fcserei · 28th February 2005, 03:09 AM

For popular demand: the amp is fully functional, no hum, hiss, buzzing etc. Inside there is a burning spot on the PS PCB, but it does not affect the amp.

thomas997 · 28th February 2005, 03:24 AM

Great price.

jleaman · 28th February 2005, 04:31 AM

i wish i had 70$ id buy that.

louisianav · 28th February 2005, 06:37 AM

Check your mail

fcserei · 28th February 2005, 01:59 PM

SOLD

28th February 2005, 06:37 AM	#6
louisianav diyAudio Member Join Date: Feb 2004 Location: half way through	I'll take it if still available... Check your mail

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which Chip AMP you like most?	dynabok	Chip Amps	154	12th December 2012 01:23 PM
Pre-amp for chip amp	wotsascott	Chip Amps	23	30th April 2006 04:24 PM
First Chip Amp	doomsweek	Chip Amps	9	10th May 2005 01:55 AM
Best possible 10W from chip amp	Robert_66	Chip Amps	14	2nd November 2004 11:43 AM
Hot chip!	batkey	Chip Amps	1	14th October 2004 11:54 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

28th February 2005, 03:09 AM	#3
fcserei diyAudio Member Join Date: Sep 2002 Location: US	For popular demand: the amp is fully functional, no hum, hiss, buzzing etc. Inside there is a burning spot on the PS PCB, but it does not affect the amp.

28th February 2005, 03:24 AM	#4
thomas997 diyAudio Member Join Date: Feb 2004 Location: Vancouver	Great price.

28th February 2005, 04:31 AM	#5
jleaman Banned Join Date: Apr 2002	i wish i had 70$ id buy that.

28th February 2005, 01:59 PM	#7
fcserei diyAudio Member Join Date: Sep 2002 Location: US	SOLD