|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Swap Meet Sell your stuff here, who knows, some other fanatic might be interested! |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
27th December 2004, 09:32 PM
|
#1 |
|
diyAudio Member
Join Date: Jan 2004
Location: NJ
|
50V power supplies, qty=2
I'm cleaning off my shelves. Powermate analog, regulated 50V enclosed power supply, with the output trimmable from an access hole from 45.5 - 55.4VDC. The input rating is 115V/12.5A. I used an 18 ohm test load and the no load and loaded output voltage read 50.0 volts. I think the units should be good for 8-10 amps out.
There are two units available, measuring 5"H x 7 1/2" W x 9 1/2" D and weighing over 19 pounds. WIthout further testing, $20 each. |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| power supplies | jjac7212 | Everything Else | 0 | 13th May 2008 09:57 PM |
| Parallel a dual power supply or two power supplies? | Thunau | Power Supplies | 12 | 16th February 2007 04:21 AM |
| HV power supplies | santa | Swap Meet | 0 | 17th January 2005 10:52 PM |
| Power Supplies | guitargully | Parts | 0 | 6th February 2004 03:45 AM |
| Regulated Power Supplies for Low Power Amps | PTL60 | Solid State | 18 | 6th February 2002 06:24 AM |
| New To Site? | Need Help? |
