FS: Hafler DH-500 Heat Tunnel (sink)

Zero Cool · 16th October 2004, 07:33 PM

FS: Hafler DH-500 Heat Tunnel (sink)

Nice large Heat sink tunnel removed from a dead DH-500 Power amp. Has holes for 12 T03 devices. 3 pairs per side. Very nice compact heatsink. the DH-500 was 250wpch@8ohms so these should work nicley for any amp under that! or build your self a nice 50-100 watt class A amp!!!

I dont know what this is worth, make an offer. i can send photo's if you wish.

Always interested in trading as well. currently i could use 4-8 large 100+ volt Power Supply caps, at least 10-20,000 UF.

Always loooking for the following transistors as well:
MPSL01
MM4003
2N5416(motorola)
2N5415(Motorola)
2N3440(motorola)
2SJ50 Mosfets
A968
C2238

Etc.

What have you got to trade???

Zero

K-amps · 1st February 2005, 03:59 PM

Hey ZC what are th dimensions of the HS?

RKH · 1st February 2005, 04:04 PM

I have some caps that may work for you.

10,000 uF, 100VDc

spind · 6th February 2005, 06:51 PM

Please email me if this heatsink is still available.

16th October 2004, 07:33 PM	#1
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	FS: Hafler DH-500 Heat Tunnel (sink) FS: Hafler DH-500 Heat Tunnel (sink) Nice large Heat sink tunnel removed from a dead DH-500 Power amp. Has holes for 12 T03 devices. 3 pairs per side. Very nice compact heatsink. the DH-500 was 250wpch@8ohms so these should work nicley for any amp under that! or build your self a nice 50-100 watt class A amp!!! I dont know what this is worth, make an offer. i can send photo's if you wish. Always interested in trading as well. currently i could use 4-8 large 100+ volt Power Supply caps, at least 10-20,000 UF. Always loooking for the following transistors as well: MPSL01 MM4003 2N5416(motorola) 2N5415(Motorola) 2N3440(motorola) 2SJ50 Mosfets A968 C2238 Etc. What have you got to trade??? Zero

1st February 2005, 04:04 PM	#3
RKH diyAudio Member Join Date: Sep 2002 Location: Colorado, USA	trade? I have some caps that may work for you. 10,000 uF, 100VDc __________________ Lighten up while you still can ...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Advise on heat sink	pmchoong	Pass Labs	13	13th August 2011 05:50 PM
Heat Sink Glue-Which?	fmak	Parts	14	14th February 2007 09:32 AM
Heat sink insulator	ECM	Car Audio	25	6th September 2006 04:07 AM
Aleph P1.7 heat sink?	sugano	Pass Labs	1	11th July 2006 02:56 PM
How much heat sink is necessary?	rosss	Pass Labs	11	23rd February 2003 05:23 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st February 2005, 03:59 PM	#2
K-amps diyAudio Member Join Date: Nov 2003 Location: Indiana	Hey ZC what are th dimensions of the HS?

6th February 2005, 06:51 PM	#4
spind diyAudio Member Join Date: Feb 2003 Location: Winnipeg	Please email me if this heatsink is still available.