Zen board for sale

Peter Daniel · 29th April 2002, 08:13 PM

Since Zen projects seem to be popular I have a tested Zen amp board for sale. I used Holco resistors, Nichicon Muse coupling caps and Elna PS filtering caps (40,000uF per channel). Will include output devices and 300W Plitron transformer. $280.00 plus shipping.

FBJ · 29th April 2002, 08:20 PM

What are the dimensions of PCB and transformer?

Peter Daniel · 29th April 2002, 08:26 PM

Transformer is 4 1/2" diameter. The board is 8 1/2 by 6", 1 3/4" high.

FBJ · 29th April 2002, 08:35 PM

Nice job on the Zen PCB.
I've a empty chassis for both but I just brought a new house and I don't have a refrigerator yet. I can keep things warm using my amplifiers but I need something to keep things cold.

P.S. If things have not sold later I would be interested.

FBJ · 30th April 2002, 03:41 AM

Hey HPotter-
I measured my chassis that I thought was big enough for your zen amp PCB and it won't fit (7.75"x6.5"). But I planning a super zen amp and I really was not should about how I was going to do it. And since you have a fully tested design how about selling me the schematics and parts list?
And I would be interest in you version of the BOZ preamp too.
FBJ

Peter Daniel · 30th April 2002, 04:42 AM

Schematics and parts lists for both Zen and Bride of Zen are under the link: http://passdiy.com/legacy.htm
I traded my BOZ for transformers.

FBJ · 30th April 2002, 06:14 AM

Well the pictures you posted of your Zen and BOZ in this post and the post you traded your design of the BOZ preamp for transformers looks difference from the original Zen and BOZ design. And the pictures only interested me because the added components which I had planned to do but haven't found the time for. Their are added components correct, to the Zen and BOZ PCBs right? And those PCBs are not layed out as the original Zen and BOZ PCBs right?

Thank you for your time.

Peter Daniel · 30th April 2002, 02:42 PM

Yes you are right those are designed by me. I might still have the artwork if you are interested. But you would need the same type of caps I used so they would fit the board.

Peter Daniel · 30th April 2002, 09:48 PM

Here is example how to easy implement that board into working amplifier.

Peter Daniel · 30th April 2002, 09:52 PM

I might also be able to include those heat sinks at my cost which is $60 (surplus). All you would need is front, back, top and bottom plates.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aleph X rev 1 Board for sale	bqc	Swap Meet	1	16th April 2012 07:02 AM
For sale: Turrets and Board Material (UK)	Merlinb	Swap Meet	1	16th April 2007 01:13 PM
LM3875 board 4 sale	WasteRunner	Chip Amps	0	24th December 2005 06:02 PM
TDA1541A DAC Board (Stuffed) FOR SALE	Coulomb	Swap Meet	1	27th February 2005 01:53 AM
Zen board for sale	Peter Daniel	Swap Meet	5	19th November 2002 09:03 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th April 2002, 08:20 PM	#2
FBJ diyAudio Member Join Date: Mar 2002 Location: USA	What are the dimensions of PCB and transformer?

29th April 2002, 08:35 PM	#4
FBJ diyAudio Member Join Date: Mar 2002 Location: USA	Nice job on the Zen PCB. I've a empty chassis for both but I just brought a new house and I don't have a refrigerator yet. I can keep things warm using my amplifiers but I need something to keep things cold. P.S. If things have not sold later I would be interested.

30th April 2002, 03:41 AM	#5
FBJ diyAudio Member Join Date: Mar 2002 Location: USA	Hey HPotter- I measured my chassis that I thought was big enough for your zen amp PCB and it won't fit (7.75"x6.5"). But I planning a super zen amp and I really was not should about how I was going to do it. And since you have a fully tested design how about selling me the schematics and parts list? And I would be interest in you version of the BOZ preamp too. FBJ

30th April 2002, 04:42 AM	#6
Peter Daniel diyAudio Member Join Date: Jul 2002 Location: Toronto, Canada	Schematics and parts lists for both Zen and Bride of Zen are under the link: http://passdiy.com/legacy.htm I traded my BOZ for transformers.

30th April 2002, 06:14 AM	#7
FBJ diyAudio Member Join Date: Mar 2002 Location: USA	Well the pictures you posted of your Zen and BOZ in this post and the post you traded your design of the BOZ preamp for transformers looks difference from the original Zen and BOZ design. And the pictures only interested me because the added components which I had planned to do but haven't found the time for. Their are added components correct, to the Zen and BOZ PCBs right? And those PCBs are not layed out as the original Zen and BOZ PCBs right? Thank you for your time.

30th April 2002, 02:42 PM	#8
Peter Daniel diyAudio Member Join Date: Jul 2002 Location: Toronto, Canada	Yes you are right those are designed by me. I might still have the artwork if you are interested. But you would need the same type of caps I used so they would fit the board.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)