PCBs for Aleph 2, Aleph 3, Aleph 4 and Aleph 5 amplifiers - Page 7

acliao · 5th August 2002, 02:46 PM

Do you know a good supplier where I can buy 2oz. Positive pre-sentisized boards? Most of the positive board suppliers I searched only carry 1oz boards. I couldn't find a supplier who carries 2oz positive board and that is the only reason I am thinking about using the Kepro system. Thanks.

Coulomb · 7th August 2002, 04:34 AM

Quote:

Normally I would just print the artwork out as normal and get a local printer to make a transparancy of it.

Can you not just photocopy it on to a transparency?

Anthony

The Saint · 7th August 2002, 04:45 AM

Yep that would work as well

Anthony

bstoll · 12th September 2002, 07:17 AM

what about dry transfers ?
anyone have experience with them ?

gilid · 12th September 2002, 07:55 AM

Acliao,

Digi-Key sell pre-sensitezed 2 oz boards. Personally, I do not recommend the Kepro process. I tried it myself, and it is very difficult to get consistent results. You are better off to use dry transfers, and apply them by hand.

12th September 2002, 07:55 AM	#65
gilid diyAudio Member Join Date: Jan 2002 Location: France	2 oz pcb's Acliao, Digi-Key sell pre-sensitezed 2 oz boards. Personally, I do not recommend the Kepro process. I tried it myself, and it is very difficult to get consistent results. You are better off to use dry transfers, and apply them by hand.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First version Aleph 0 (Null, ZERO, O, Os, 0s) versus later Aleph versions	tiefbassuebertr	Pass Labs	13	27th April 2012 02:13 AM
Aleph (Single Ended) + Larvadin (no Memory Distortion) = Ultimate Aleph?	tiefbassuebertr	Pass Labs	17	9th January 2012 02:10 PM
First version Aleph 0 (Null, ZERO, O, Os, 0s) versus later Aleph versions	tiefbassuebertr	Pass Labs	0	6th August 2009 11:11 AM
WTB: Aleph-mini PCBs and transistor set for Aleph 30	needtubes	Swap Meet	4	6th November 2005 06:29 PM
Trade Aleph X PCBs for Aleph P 1.7 PCBs	highbias	Pass Labs	0	27th September 2004 05:59 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th August 2002, 02:46 PM	#61
acliao diyAudio Member Join Date: May 2002 Location: Los Angeles, CA	Do you know a good supplier where I can buy 2oz. Positive pre-sentisized boards? Most of the positive board suppliers I searched only carry 1oz boards. I couldn't find a supplier who carries 2oz positive board and that is the only reason I am thinking about using the Kepro system. Thanks.

7th August 2002, 04:45 AM	#63
The Saint diyAudio Member Join Date: Jul 2002 Location: Launceston, TAS, Australia	Yep that would work as well Anthony

12th September 2002, 07:17 AM	#64
bstoll diyAudio Member Join Date: Aug 2002	what about dry transfers ? anyone have experience with them ?