"The Wire" Ultra-High Performance Headphone Amplifier
This is my second "The Wire" headphone amp, which features a metal case, a volume pot, and was built by long-time diyaudio member merlin2069er.
Condition is Used -- Good on Amazon scale.
$OLD. Will list my another The Wire soon.
This is my second "The Wire" headphone amp, which features a metal case, a volume pot, and was built by long-time diyaudio member merlin2069er.
Condition is Used -- Good on Amazon scale.
$OLD. Will list my another The Wire soon.
Last edited:
Will try to do that later if I have the chance, but it's just RCA in at the back, really.
110v (you will need to replace the internal transformer or get an external one for 220v).
Dimensions are 8" x 13" x 3" , meaning there should be plenty of room for a replaced transformer if you wish.
As for internal photos, will try to take some when I have a chance. At the time I bought this off from merlin2069er, there was not even an external photo...
Dimensions are 8" x 13" x 3" , meaning there should be plenty of room for a replaced transformer if you wish.
As for internal photos, will try to take some when I have a chance. At the time I bought this off from merlin2069er, there was not even an external photo...
If you really want internal pic (don't have the right hexagon screwdriver handy for this one), you can get my other The Wire amp listed elsewhere:
"The Wire" SE-SE Headphone Amplifier combo with matching DAC ** measures significantly better than O2** | Head-Fi.org
As you can see, this other one do not have a volume pot, and cannot take DC offset by default.
"The Wire" SE-SE Headphone Amplifier combo with matching DAC ** measures significantly better than O2** | Head-Fi.org
As you can see, this other one do not have a volume pot, and cannot take DC offset by default.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.