• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: I2S - lvds (hdmi) tranceiver boards

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
B

bambadoo

Member
Joined 2003
I have made up some i2s to lvds (hdmi interface) transceiver boards. It is psaudio standard.
I have 7 left.
I use one with my rpi to a audiozen sk1021/soekris dac.
This board transmits I2S signals using LVDS with HDMI cable.


Cost is 23 (reduced from 25) euro plus shipping (3 euro as letter in the EU). Parts included: (smd resistors and caps, 100uf polymer cap, 2 smd chips and hdmi connector. Other connectors are not included ) Everything bought from mouser.
Board is unpopulated but I can help solder? Up to you.
It needs 3.3vdc to work :)
An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.
 
Last edited:
B

bvtrinh

Member
Joined 2014
Pass through option

Hello,

I was wondering if it would be possible to do a pass through option for video?
Thank you!

Bao

bambadoo said:
I have made up some i2s to lvds (hdmi interface) transceiver boards. It is psaudio standard.
I have 7 left.
I use one with my rpi to a audiozen sk1021/soekris dac.
This board transmits I2S signals using LVDS with HDMI cable.


Cost is 20 (reduced from 25) euro plus shipping (around 2 euro as letter in Europe). Parts included: (smd resistors and caps, 100uf polymer cap, 2 smd chips and hdmi connector. ) Everything bought from mouser.
Board is unpopulated but I can help solder? Up to you.
It needs 3.3vdc to work :)
An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.
Click to expand...
 
B

bambadoo

Member
Joined 2003
Dont think so. I really dont know :)

5 finished pcs left.
 

Attachments

  • 20180116_184459.jpg
    20180116_184459.jpg
    878.3 KB · Views: 65
  • 20180115_104801.jpg
    20180115_104801.jpg
    761.8 KB · Views: 61
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom