Another CDROM Controller Kit - Page 11

pradit_p · 24th September 2008, 03:42 AM

change .txt to .inc

pradit_p · 24th September 2008, 03:47 AM

change .txt to .inc

use all 3 file to complie to Pic16F877a

pradit_p · 24th September 2008, 03:49 AM

change .txt to .inc

pasan · 24th September 2008, 11:39 AM

woow awesome. Thanks Mr. Pradit

neo_hijacker · 24th September 2008, 07:15 PM

Thank you !

pradit_p · 25th September 2008, 02:55 AM

In Schematic Modifymucop.pdf
for remote function take out diode D2.

Regards,
Pradit

Radioman62 · 25th September 2008, 12:30 PM

This is really nice of you pradit_p

I have several projects going on but this one is dragging me towards my experiment board.
Before I start I would like to hear from those who eventually have a PCB layout done by themself. Or is there some PCB's left from your kit's pradit_p ?
Otherwise I have to do one by myself. I think it will be an easy one with one layer. I use Eagle.
But first I have to test trough my development board, specifically done for the PIC16F88 and16F877A

Before I install Microchip's software and try do do my own hexfile
1. Can you post the hexfile for the sourcefiles above pradit_p?

2. I assume the other hexfile posted earlier in this thread is just for test and not fully working ? (Now that we have the source, the idiot is asking for the hexfile ??

)

thanks // Ove

Jempie · 25th September 2008, 01:10 PM

Dear Lucifix or any one else,

I like to use this with the modi (ROCKNA controller card)

- all remote functions (also open and close button)
- standby
- see on the display the title and the artist

if have try both and 16F877A and 18F452 18F452 is mutch
better thanks to Lucifix

We need for school to change the text in to Holland
could you send me the source for both chips

Thanks in advance

pradit_p · 26th September 2008, 03:02 AM

Hello, Mr. Radioman62

Hex file that I post before can use full function, accept remote function because remote function need to check ID of remote to match before use that mean you need to got the right remote, so I take this function out.

For this Hex file more than 300 people download but no one complain me that it's not work if your wiring is correct. And also some one confirm that it's surely work.

Regards,
Pradit

mindwipe · 28th September 2008, 11:45 PM

Pradit,

I just wanted to thank you for sharing your code... If I get around to it I'm going to mod it and use a blue touchscreen gLCD to create a sort-of Classe Audio CD Player. Don't know when I'll get around to it, but this is one hell of a good start in the right direction. Thanks again!

24th September 2008, 11:39 AM	#104
pasan diyAudio Member Join Date: Feb 2007 Location: Sri Lanka	woow awesome. Thanks Mr. Pradit __________________ pasan...

25th September 2008, 12:30 PM	#107
Radioman62 diyAudio Member Join Date: Mar 2005 Location: Near Gothenburg, the westcoast of Sweden	Nice This is really nice of you pradit_p I have several projects going on but this one is dragging me towards my experiment board. Before I start I would like to hear from those who eventually have a PCB layout done by themself. Or is there some PCB's left from your kit's pradit_p ? Otherwise I have to do one by myself. I think it will be an easy one with one layer. I use Eagle. But first I have to test trough my development board, specifically done for the PIC16F88 and16F877A Before I install Microchip's software and try do do my own hexfile 1. Can you post the hexfile for the sourcefiles above pradit_p? 2. I assume the other hexfile posted earlier in this thread is just for test and not fully working ? (Now that we have the source, the idiot is asking for the hexfile ?? ) thanks // Ove

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Samsung 1602VFD For CDROM Controller & Remote Volume Controller	slowgay	Swap Meet	2	22nd November 2008 02:44 PM
CDROM controller	muka	Swap Meet	17	11th January 2006 08:12 PM
Help with Multi-cdrom controller	lapda	Digital Source	4	8th February 2004 12:49 AM
they have a 51-based cdrom controller now	EJ	Digital Source	3	13th July 2002 12:42 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th September 2008, 07:15 PM	#105
neo_hijacker diyAudio Member Join Date: Sep 2008	Thank you !

25th September 2008, 02:55 AM	#106
pradit_p diyAudio Member Join Date: Mar 2003 Location: Thailand	In Schematic Modifymucop.pdf for remote function take out diode D2. Regards, Pradit

25th September 2008, 01:10 PM	#108
Jempie diyAudio Member Join Date: Jan 2008	Dear Lucifix or any one else, I like to use this with the modi (ROCKNA controller card) - all remote functions (also open and close button) - standby - see on the display the title and the artist if have try both and 16F877A and 18F452 18F452 is mutch better thanks to Lucifix We need for school to change the text in to Holland could you send me the source for both chips Thanks in advance

26th September 2008, 03:02 AM	#109
pradit_p diyAudio Member Join Date: Mar 2003 Location: Thailand	Hello, Mr. Radioman62 Hex file that I post before can use full function, accept remote function because remote function need to check ID of remote to match before use that mean you need to got the right remote, so I take this function out. For this Hex file more than 300 people download but no one complain me that it's not work if your wiring is correct. And also some one confirm that it's surely work. Regards, Pradit

28th September 2008, 11:45 PM	#110
mindwipe diyAudio Member Join Date: Jan 2007	Pradit, I just wanted to thank you for sharing your code... If I get around to it I'm going to mod it and use a blue touchscreen gLCD to create a sort-of Classe Audio CD Player. Don't know when I'll get around to it, but this is one hell of a good start in the right direction. Thanks again!