Selling some spare PSU boards for V-FET or other class A designs as I had more of these made than I need.
Made for my own (in progress) V-FET amps, but the only thing that makes them especially suited for the V-FET project is that the board colour matches the V-FET amp PCBs 😀
Board dimensions are 78 x 170 mm.
Features:
- Onboard space for 6 x 35mm snap-in caps in CC-R-C configuration.
- Space for 5mm LED + series resistor up to 1W per rail.
- Space for 15mm MKP/MKT box cap for decoupling.
- Space for 4 x 3W series resistors per rail.
- Space for (optional) 3W bleeder resistor per rail for the first capacitor pairs (the LEDs are across the last pair).
- Space for on-board rectifier bridges up to 25A (320A surge). If you want more headroom, it should be possible to easily jumper the onboard bridges and connect two external bridges instead (e.g. 35/50A metal package).
- Input and output via 1/4" FAST-ON connectors.
- Full groundplane on top and copper polygons for the rails on the bottom.
The boards are HASL-plated (non-RoHS) and 2oz copper. Made in China, but overall very decent quality.
Asking $12 per board or $20 for a pair. PP and shipping not included - ask for costs to your destination.
A few more pics here.
Made for my own (in progress) V-FET amps, but the only thing that makes them especially suited for the V-FET project is that the board colour matches the V-FET amp PCBs 😀
Board dimensions are 78 x 170 mm.
Features:
- Onboard space for 6 x 35mm snap-in caps in CC-R-C configuration.
- Space for 5mm LED + series resistor up to 1W per rail.
- Space for 15mm MKP/MKT box cap for decoupling.
- Space for 4 x 3W series resistors per rail.
- Space for (optional) 3W bleeder resistor per rail for the first capacitor pairs (the LEDs are across the last pair).
- Space for on-board rectifier bridges up to 25A (320A surge). If you want more headroom, it should be possible to easily jumper the onboard bridges and connect two external bridges instead (e.g. 35/50A metal package).
- Input and output via 1/4" FAST-ON connectors.
- Full groundplane on top and copper polygons for the rails on the bottom.
The boards are HASL-plated (non-RoHS) and 2oz copper. Made in China, but overall very decent quality.
Asking $12 per board or $20 for a pair. PP and shipping not included - ask for costs to your destination.
A few more pics here.
- Status
- Not open for further replies.