• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Accuton C173-6-096E Midbass drivers (Pair)

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
S

spurzheim

Member
Joined 2007
I'm selling one pair of lightly used Accuton C173-6-096E 6.5" Ceramic Dome Bass/Midrange drivers. I've never owned a better driver.

They sell for $909USD/each at Madisound:

https://www.madisoundspeakerstore.c...amic-cone-woofer/midrange-neodymium/?mobile=0

I'm asking $SOLD$ for the pair.

/////////////

The C173-6-096E is a 6.5 inch bass-midrange driver with ultra hard ceramic dome. Anti-resonant cutout fills in the ceramic dome provide for damping of the 6 kHz dome resonance. A FEA optimized underhung motor design with 55 mm titanium voice coil former guarantees very low energy storage and good heat transfer. Its high force factor leads to outstanding transient response for more realistic reproduction. The low loss rubber surround and a thin fabric spider center the moving parts with high linearity.

For this amazing bass-midrange driver, we recommend an application from 40 Hz - 3000 Hz.

Special Dome Cutouts
Underhung Motor Design
Neodymium Magnet
55mm Titanium VC Former
Soft Rubber Surround
Vented VC, Pole Piece & Spider
 
Last edited:
S

spurzheim

Member
Joined 2007
1017431-accuton-c1736095e-midbass-drivers.jpg


1017432-accuton-c1736095e-midbass-drivers.jpg
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom