WANTED: LCD projector parts!

ForGreatJustice · 7th February 2004, 04:28 AM

HELP! I'm trying to repair a projector, and I am looking for an LCD driver chip. The driver is used in a Mitsubishi X120 projector (also Telex P1000, Dukane Imagepro 8700, Polaroid Polaview 335, and JVC DXL1000).

If any of your projectors have the chip and carrier module I need, I'll gladly buy them.

Essentially, the assembly is a chip marked:
EPSON 1997
EV9608AD
F99090159

The chip is surface mounted in a blue interconnect module marked: 7308D

This module is also mounted into the board.

if you have this part in any of your projectors, or if you have a broken projector of any of the models above, or a board from those projectors, please let me know!

Many thanks,

T. Ching

sparkie · 25th March 2004, 11:52 AM

Hi, it would appear we have the same problem. I have a mitsubishi X100, and the same chip is damaged (7308D Epson IC). I am also trying to source it, if I am unsuccessful, are you still interested in buying the board, (it has another two if the same chips on it)?

Regards

Sparkie

PS I'm in the UK

LeucoMax · 6th May 2004, 04:46 PM

Hi guys,

what symtoms do you have? Any shifting letters? Shift to the left in red?
What´s the number of the optical block?
Do you have any manuals?

I found the same chip in my InFocus 730 and have the above symptoms

LeucoMax

sparkie · 14th May 2004, 04:31 PM

Hi guys, I've managed to get a service manual for my X100, it would appear that these chips are ASICs used to drive the RGB components of the video for the separate LCDs. They are no longer available as spares, so I guess its a question of who wants to buy and who wants to sell. Let me know if your interested either way. Since they are driver chips I would imagine that you would have some sort of problem which one of the colours. In my case I have no red.

LeucoMax · 14th May 2004, 07:34 PM

@Sparkie

Hello and thanks for information.
My problem is a red shadow on the left side on all visible items - best seen in computer images. But on movies, too but not so dominant.

Are these problems described in your manual? Where did you get one?

LeucoMax

LeucoMax · 20th May 2004, 01:42 PM

@ sparkie

> service manual for my X100, it would appear that these chips are ASICs used to drive the RGB components of the video for the separate LCDs.

Do you have this manual in electronic format (scanned? pdf-file?)
May I have a copy of it?

Thanks

LeucoMax

jankro · 19th December 2005, 08:23 PM

Has anyone found out any more regarding this subject?

I have a Telex P1000 with three broken chips :-(

I need al least two of these chips with carriers.

jankro

7th February 2004, 04:28 AM	#1
ForGreatJustice diyAudio Member Join Date: Jan 2004 Location: Florida	WANTED: LCD projector parts! HELP! I'm trying to repair a projector, and I am looking for an LCD driver chip. The driver is used in a Mitsubishi X120 projector (also Telex P1000, Dukane Imagepro 8700, Polaroid Polaview 335, and JVC DXL1000). If any of your projectors have the chip and carrier module I need, I'll gladly buy them. Essentially, the assembly is a chip marked: EPSON 1997 EV9608AD F99090159 The chip is surface mounted in a blue interconnect module marked: 7308D This module is also mounted into the board. if you have this part in any of your projectors, or if you have a broken projector of any of the models above, or a board from those projectors, please let me know! Many thanks, T. Ching

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
javascript:smilie(':att\'n:')Wanted 3M 8620 LCD projector parts	squidward	Swap Meet	0	27th November 2005 10:24 PM
FS: Projector Parts - Overhead Projector, lenses, mirrors, + more	Moose	Swap Meet	4	27th November 2005 08:37 PM
FS- DIY Projector Parts	Jeckal	Swap Meet	0	13th December 2004 09:49 PM
WANTED>>>Overhead projector or projector!!!	phaze5	Swap Meet	1	12th June 2003 04:24 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th March 2004, 11:52 AM	#2
sparkie diyAudio Member Join Date: Mar 2004 Location: Southsea UK	Hi, it would appear we have the same problem. I have a mitsubishi X100, and the same chip is damaged (7308D Epson IC). I am also trying to source it, if I am unsuccessful, are you still interested in buying the board, (it has another two if the same chips on it)? Regards Sparkie PS I'm in the UK

6th May 2004, 04:46 PM	#3
LeucoMax diyAudio Member Join Date: Jan 2004 Location: Carinthia	Hi guys, what symtoms do you have? Any shifting letters? Shift to the left in red? What´s the number of the optical block? Do you have any manuals? I found the same chip in my InFocus 730 and have the above symptoms LeucoMax

14th May 2004, 04:31 PM	#4
sparkie diyAudio Member Join Date: Mar 2004 Location: Southsea UK	Hi guys, I've managed to get a service manual for my X100, it would appear that these chips are ASICs used to drive the RGB components of the video for the separate LCDs. They are no longer available as spares, so I guess its a question of who wants to buy and who wants to sell. Let me know if your interested either way. Since they are driver chips I would imagine that you would have some sort of problem which one of the colours. In my case I have no red.

14th May 2004, 07:34 PM	#5
LeucoMax diyAudio Member Join Date: Jan 2004 Location: Carinthia	@Sparkie Hello and thanks for information. My problem is a red shadow on the left side on all visible items - best seen in computer images. But on movies, too but not so dominant. Are these problems described in your manual? Where did you get one? LeucoMax

20th May 2004, 01:42 PM	#6
LeucoMax diyAudio Member Join Date: Jan 2004 Location: Carinthia	@ sparkie > service manual for my X100, it would appear that these chips are ASICs used to drive the RGB components of the video for the separate LCDs. Do you have this manual in electronic format (scanned? pdf-file?) May I have a copy of it? Thanks LeucoMax

19th December 2005, 08:23 PM	#7
jankro diyAudio Member Join Date: Dec 2005 Location: Finland	Has anyone found out any more regarding this subject? I have a Telex P1000 with three broken chips :-( I need al least two of these chips with carriers. jankro