• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

want to sell your measuring microphone and/or mic-amp?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
You can try to get a decent capsule from B&K on eBay, but they are getting pricey now. There are calibrators, too.

There are good baked research mics out there, too. Earthworks are very good.

http://www.earthworksaudio.com/25.html
http://www.audioxpress.com/bksprods/kits/kd-4.htm
http://www.speakerbuilder.net/web_files/Articles/diymic/diymicmain.htm
http://home1.gte.net/tammie_eric/audio/preamp/preamp.html

digikey sells the famous Panasonic capsules that are fine for this work. They are fine for most audio work, actually! :idea:
 
Raoul, I am thinking about speaker diy. So need equipment to measure the driver and speaker performance.


Warren, great links. Thanks a lot. Now I have enough info to design my own gear now. I have couple of unknown electret mic in my junk box. I just don't know their freq response. According to all I read in the links you supplied, most of them should give pretty flat response from 20-20KHz.

Have a good day, gents...

Kam
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.