• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Soren R-2R DAC, Built

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
M

MisterRogers

Member
Joined 2011
SOLD!

This build is top of the line. Every component in it was chosen for the best possible performance. The Sonore USB board was chosen for the optional OSF that can be engaged. When it's turned on, input will be up sampled to 352/384 using proprietary digital filters. At these sample rates, the Soren R-2R DAC runs in NOS mode (with one FIR2). The hardware OSF is a sophisticated minimum phase filter that greatly reduces pre-ringing while still providing excellent stop band rejection.
What this means is, you can choose to ignore filter 'rolling', enabling the onboard OSF. Or, disable it and enjoy the growing library of filters.

Here's the parts / price breakdown:

$250 - Sonore USB Receiver
$250 for 0.02% tolerance resistor R-2R
$150 SSR03 Super Shunt Regulator. Best possible PS. Built for 12V
$150 2 x Reflektor-D 3.3V PS for the ISO PS, 3.6V for the Sonore.
$25 wire, connectors, IEC, etc.
$150 For custom case
$60 for 2 x transformers
$165 Labor

Selling for:
$1000 + paypal fees + shipping

Here's a link to the Sonore USB receiver:
SONORE USB Interface

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.
 
Last edited:
E

Egindin

Member
Joined 2005
MisterRogers said:
This build is top of the line. Every component in it was chosen for the best possible performance. The Sonore USB board was chosen for the optional OSF that can be engaged. When it's turned on, input will be up sampled to 352/384 using proprietary digital filters. At these sample rates, the Soren R-2R DAC runs in NOS mode (with one FIR2). The hardware OSF is a sophisticated minimum phase filter that greatly reduces pre-ringing while still providing excellent stop band rejection.
What this means is, you can choose to ignore filter 'rolling', enabling the onboard OSF. Or, disable it and enjoy the growing library of filters.

Here's the parts / price breakdown:

$250 - Sonore USB Receiver
$250 for 0.02% tolerance resistor R-2R
$150 SSR03 Super Shunt Regulator. Best possible PS. Built for 12V
$150 2 x Reflektor-D 3.3V PS for the ISO PS, 3.6V for the Sonore.
$25 wire, connectors, IEC, etc.
$150 For custom case
$60 for 2 x transformers
$165 Labor

Selling for:
$1000 + paypal fees + shipping

Here's a link to the Sonore USB receiver:
SONORE USB Interface

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.
Click to expand...

Sorry for being out of topic, but I really love this chassis. Did you build it yourself?
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom