oops, not precisely a 'giveaway'
i've already built mine and several others to phenomenal results. better than myref in my opinion, and better than most high end commercial offerings to my associates. with the salas shunt taking over the psu duty of the 1st gain stage, the sonic is truly unbelievable.
i still have plenty of pcbs left
http://www.diyaudio.com/forums/swap-meet/241696-miniref-pcbs-sale.html
price reduced to $5 +shippping. i just need to make back on the cost of fabrication.
for those who i still owe from the polystyrene group buy, please let me know your location and i will send you 2 pcbs for the price of shipping only.
best regards,
eric
i've already built mine and several others to phenomenal results. better than myref in my opinion, and better than most high end commercial offerings to my associates. with the salas shunt taking over the psu duty of the 1st gain stage, the sonic is truly unbelievable.
i still have plenty of pcbs left
http://www.diyaudio.com/forums/swap-meet/241696-miniref-pcbs-sale.html
price reduced to $5 +shippping. i just need to make back on the cost of fabrication.
for those who i still owe from the polystyrene group buy, please let me know your location and i will send you 2 pcbs for the price of shipping only.
best regards,
eric
Last edited:
Hi Eric
What's about shipping costs to France ?
Will the BOM be supplied too ?
Regards
Phil
What's about shipping costs to France ?
Will the BOM be supplied too ?
Regards
Phil
Last edited:
ok here is the official shipping quote for 0.5kg and below
??? ???? EMS ???
$15 hongkong,singapore, china
$18 china
$22 america
$20 europe
??? ???? EMS ???
$15 hongkong,singapore, china
$18 china
$22 america
$20 europe
Hi, I think I want two PCBs... could you set two apart for me?
Trying to locate the thread about the miniref now. Schematic?
Trying to locate the thread about the miniref now. Schematic?
Here's the thread:
http://www.diyaudio.com/forums/chip-amps/184165-miniref-schematic-pcb-layout.html
The schematics/layouts shown in the thread do not include the Salas shunt, which PreSapian added later.
I'll add that the MiniRef(s) have been tested with a wide variety of dual opamps, both monolithic and discrete, with minor compensation tweaks in some cases. I have a pair of FET990 discretes in mine, and PreSapian has tried my LF03d discrete in his MiniRef (which includes the Salas shunt). I expect that my LF05 folded-Kaneda Class-A discrete opamp will also work without any changes - will confirm that within a few days.
http://www.diyaudio.com/forums/chip-amps/184165-miniref-schematic-pcb-layout.html
The schematics/layouts shown in the thread do not include the Salas shunt, which PreSapian added later.
I'll add that the MiniRef(s) have been tested with a wide variety of dual opamps, both monolithic and discrete, with minor compensation tweaks in some cases. I have a pair of FET990 discretes in mine, and PreSapian has tried my LF03d discrete in his MiniRef (which includes the Salas shunt). I expect that my LF05 folded-Kaneda Class-A discrete opamp will also work without any changes - will confirm that within a few days.
that's also the concern i got from korben.
when i was asking the clerk about the shipping quote, i told her they were pcbs and that was price she gave me. let me see again if the package can be treated as a letter.
when i was asking the clerk about the shipping quote, i told her they were pcbs and that was price she gave me. let me see again if the package can be treated as a letter.
I believe most of PCB being shipped is bubble wrapped envelopes.
At least that's what I've been receiving.
Kindly PM me for 2 pcs shipped to Malaysia.
At least that's what I've been receiving.
Kindly PM me for 2 pcs shipped to Malaysia.
Hi Eric, shipping seems high for a pcb. Could you send a board in an envelope?
I've recv. PCBs from other forum members thru envelope (used for CDs) sent by ordinary post at very low rates.
Last edited:
Hi PreSapian, do you have two PCBs left for me?
(These look good for using with active crossover and two way nearfields.)
Thanks
(These look good for using with active crossover and two way nearfields.)
Thanks
- Status
- Not open for further replies.