Hi all. I am offering my reserved Shiga Mk.II for sale. Those who have heard about this but need more info should go here
http://www.diyaudio.com/forums/group-buys/238895-shigaclone-new-gb-2013-a.html
and here to learn about how it all started
http://www.diyaudio.com/forums/digi...affordable-cd-transport-shigaclone-story.html
I have a Mk.I and jumped at the chance last to get a Mk.II but things in my system have changed. I have finally completed my fully networked solution for streaming music to my DAC. At this point the Mk.II would be an interesting experiment but no longer mandatory.
My Mk.II as ordered is rather special. It is mounted with only the SMD parts using Mundorf solder, and comes with all the remaining parts for the board and additional Mundorf solder to complete the job. I did this with the Mk.I board so I could install higher end parts for those locations which needed it. It saved having to desolder and remove parts from the board. This is a chance for anyone who wants to get into a great kit purchase for what I'm sure will be an even better transport than the Mk.I I built last year.
Price is €179.57 EUR or $252.11 USD, exactly what I paid for it. If interested please PM.
Item has been SOLD.
http://www.diyaudio.com/forums/group-buys/238895-shigaclone-new-gb-2013-a.html
and here to learn about how it all started
http://www.diyaudio.com/forums/digi...affordable-cd-transport-shigaclone-story.html
I have a Mk.I and jumped at the chance last to get a Mk.II but things in my system have changed. I have finally completed my fully networked solution for streaming music to my DAC. At this point the Mk.II would be an interesting experiment but no longer mandatory.
My Mk.II as ordered is rather special. It is mounted with only the SMD parts using Mundorf solder, and comes with all the remaining parts for the board and additional Mundorf solder to complete the job. I did this with the Mk.I board so I could install higher end parts for those locations which needed it. It saved having to desolder and remove parts from the board. This is a chance for anyone who wants to get into a great kit purchase for what I'm sure will be an even better transport than the Mk.I I built last year.
Price is €179.57 EUR or $252.11 USD, exactly what I paid for it. If interested please PM.
Item has been SOLD.
Last edited:
Esteban, here's Tibi's post as to what is included in the Mk.II kit. This is what I ordered, except in my case the through hole components are not soldered on to the board, but the SMD components are soldered on with Mundorf solder.
http://www.diyaudio.com/forums/group...ml#post3554943
http://www.diyaudio.com/forums/group...ml#post3554943
Sorry about that. Just so it's on the record, the kit contains:
- main board
- power supply
- display and control board
- low noise shielded trafo
- CD mechanic
- Al non-magnetic CD puck
- IR remote control
Correction. The Ready Mounted and Tested does not include the trafo, remote, or mechanism. Apologies.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.