FS: tvicol Shigaclone Mk.II - diyAudio
Go Back   Home > Forums > Commercial Sector > Swap Meet

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 8th March 2014, 11:57 PM   #1
diyAudio Member
 
Join Date: Mar 2006
Location: New Jersey
Default FS: tvicol Shigaclone Mk.II

Hi all. I am offering my reserved Shiga Mk.II for sale. Those who have heard about this but need more info should go here

Shigaclone new GB 2013

and here to learn about how it all started

Finally, an affordable CD Transport: the Shigaclone story

I have a Mk.I and jumped at the chance last to get a Mk.II but things in my system have changed. I have finally completed my fully networked solution for streaming music to my DAC. At this point the Mk.II would be an interesting experiment but no longer mandatory.

My Mk.II as ordered is rather special. It is mounted with only the SMD parts using Mundorf solder, and comes with all the remaining parts for the board and additional Mundorf solder to complete the job. I did this with the Mk.I board so I could install higher end parts for those locations which needed it. It saved having to desolder and remove parts from the board. This is a chance for anyone who wants to get into a great kit purchase for what I'm sure will be an even better transport than the Mk.I I built last year.

Price is €179.57 EUR or $252.11 USD, exactly what I paid for it. If interested please PM.

Item has been SOLD.

Last edited by tonyptony; 4th April 2014 at 01:10 PM.
  Reply With Quote
Old 11th March 2014, 06:50 PM   #2
diyAudio Member
 
Join Date: Feb 2010
Location: S.California
Default interested

Sir,
I sent you a PM. I'm interested in this kit. Is it a full kit? Boards, Transport, remote, and Alum Puck? Thank you very much.

Tony G
  Reply With Quote
Old 11th March 2014, 09:14 PM   #3
diyAudio Member
 
Join Date: Mar 2006
Location: New Jersey
PM sent in return.
  Reply With Quote
Old 13th March 2014, 03:43 PM   #4
diyAudio Member
 
Join Date: Mar 2006
Location: New Jersey
Tony G, are you out there? PM sent.
  Reply With Quote
Old 13th March 2014, 04:48 PM   #5
dady is offline dady  Argentina
diyAudio Member
 
dady's Avatar
 
Join Date: Oct 2002
Location: Punta Prima, Menorca, Spain
Send a message via MSN to dady Send a message via Skype™ to dady
Is this a complete kit? Can you describe the parts that you have in the kit?
Take a good day and week
Regards from Spain
__________________
Esteban Bikic
  Reply With Quote
Old 13th March 2014, 09:53 PM   #6
diyAudio Member
 
Join Date: Mar 2006
Location: New Jersey
Esteban, here's Tibi's post as to what is included in the Mk.II kit. This is what I ordered, except in my case the through hole components are not soldered on to the board, but the SMD components are soldered on with Mundorf solder.

http://www.diyaudio.com/forums/group...ml#post3554943
  Reply With Quote
Old 13th March 2014, 09:56 PM   #7
dady is offline dady  Argentina
diyAudio Member
 
dady's Avatar
 
Join Date: Oct 2002
Location: Punta Prima, Menorca, Spain
Send a message via MSN to dady Send a message via Skype™ to dady
Thanks Tony, the link doesn't work but I can establish that is the complete kit with remote and clamp
Best Regards
__________________
Esteban Bikic
  Reply With Quote
Old 13th March 2014, 10:51 PM   #8
diyAudio Member
 
Join Date: Mar 2006
Location: New Jersey
Sorry about that. Just so it's on the record, the kit contains:

- main board
- power supply
- display and control board
- low noise shielded trafo
- CD mechanic
- Al non-magnetic CD puck
- IR remote control
  Reply With Quote
Old 30th March 2014, 12:55 PM   #9
diyAudio Member
 
Join Date: Mar 2006
Location: New Jersey
BUMP
  Reply With Quote
Old 2nd April 2014, 11:11 PM   #10
diyAudio Member
 
Join Date: Mar 2006
Location: New Jersey
Quote:
Originally Posted by tonyptony View Post
Sorry about that. Just so it's on the record, the kit contains:

- main board
- power supply
- display and control board
- low noise shielded trafo
- CD mechanic
- Al non-magnetic CD puck
- IR remote control
Correction. The Ready Mounted and Tested does not include the trafo, remote, or mechanism. Apologies.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Adcom GFA-555 mk.ii Toroids K-amps Swap Meet 2 10th June 2013 03:15 AM
Classic Aragon (2004, 2004 MK II, 4004, 4004 MK II ) problems, experience and repairs MagicMarksy Solid State 1 22nd May 2010 03:36 PM
FS one pairKrell KSA100 Mk II Klone boards. bikehorn Swap Meet 1 4th February 2010 02:04 PM
FS: ALON MODEL IV Mk.II SPEAKERS rayr20683 Swap Meet 0 14th February 2009 01:15 PM
FS: Alon Model IV MK II rayr20683 Swap Meet 0 17th January 2008 04:04 PM


New To Site? Need Help?

All times are GMT. The time now is 06:40 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2