Two of these were build and I cannot keep both. This is fantastic sounding amplifer, I could easily say not only the best diy one, but it superseeds many high priced commercial amplifiers too 😉
My VSSA amplifier was built in a ultimate way with best parts possible. Here is the list, what this beautiful case include:
- 2 VSSA modules, assembled and calibrated for less than 1mV offset, Nichicon FG caps everywhere
-2 hot rodded Hypex SMPS 400A180 power supplies; input Samwhas replaced by 1500uF 200V Panasonic high current 105C series, secondary Samwhas capacitors replaced with Panasonic FMs, series NTC bypassed
- added soft start circuit with delay, NTC and high inrush relay
- QED micro silver PSU and speaker wiring, with crimped and soldered faston terminals
- pure 0.5 mm input interconnect silver wire in teflon pipe
- case which is made of 5 mm aluminium, natural eloxated; all holes are laser cut; heatsinks are Fischer SK157 type
Price: 850 EUR + post costs
Some photos below...
My VSSA amplifier was built in a ultimate way with best parts possible. Here is the list, what this beautiful case include:
- 2 VSSA modules, assembled and calibrated for less than 1mV offset, Nichicon FG caps everywhere
-2 hot rodded Hypex SMPS 400A180 power supplies; input Samwhas replaced by 1500uF 200V Panasonic high current 105C series, secondary Samwhas capacitors replaced with Panasonic FMs, series NTC bypassed
- added soft start circuit with delay, NTC and high inrush relay
- QED micro silver PSU and speaker wiring, with crimped and soldered faston terminals
- pure 0.5 mm input interconnect silver wire in teflon pipe
- case which is made of 5 mm aluminium, natural eloxated; all holes are laser cut; heatsinks are Fischer SK157 type
Price: 850 EUR + post costs
Some photos below...
Attachments
Hi Supernet,
Was this the chassis that LC was to sell or one you designed based on his model?
Thanks
Do
Was this the chassis that LC was to sell or one you designed based on his model?
Thanks
Do
AB class with Hypex SMPS power supply. It can put out 80W/8ohm and 140W/4ohm. For more info, look into VSSA thread here on Vendor forums.
How much cost?
Hi Dear, I would like to know how is composed your offer, if include the SMPS?
Best Regards
Esteban🙂
Hi Dear, I would like to know how is composed your offer, if include the SMPS?
Best Regards
Esteban🙂
My offer include everything you see on the photo: enclosure, VSSA modules (calibrated & tested), Hypex SMPSs with Panasonic capacitors....whole perfectly working amplifier 😉
Hi Supernet, the price is good, the amp is good also. But is so far from my budget. I am a DIY, one of the reasons that are many is my budget. I know the amp is incredible, heatsink, the cabinet the components. Maybe is a hiend amp. Sorry friend. Dovro.
- Status
- Not open for further replies.