WTB blank rack mount face plates

woody · 15th December 2003, 11:36 PM

I need 2 or 3 blank rack mount face plates at least 19.5" to 24"
high. I am willing to pay a reasonable price....

Regards,

Woody

cm961 · 16th December 2003, 03:52 AM

I've seen them on Ebay before, otherwise you could try www.onlinemetals.com

You'd still have to drill holes though.

Pete

Da5id4Vz · 16th December 2003, 09:30 PM

A manufacture:

http://www.middleatlantic.com/rackac.../bpanels.htm#6

Available through this distributor:

http://www.markertek.com/

Not necessarily the cheapest in town, but descent quality.

Also a source for custom fabrication and engraving:

http://www.markertek.com/custom.html

And finaly there are these guys who do a nice custom panel with EL backlit logo.

http://www.rcicustom.com/index2.htm

http://www.rcicustom.com/EL.htm

Apex Jr · 16th December 2003, 09:36 PM

I have 2 - 17 1/2" Aluminum rack panels in stock at $15.00ea

Steve @ Apex Jr

tiroth · 16th December 2003, 09:48 PM

Can always rely on you for a good price Steve.

Da5id4Vz · 16th December 2003, 09:54 PM

Sorry Steve I should have added you to my list too.

15th December 2003, 11:36 PM	#1
woody diyAudio Member Join Date: Jan 2002 Location: Tyrone Ga. U.S.A.	WTB blank rack mount face plates I need 2 or 3 blank rack mount face plates at least 19.5" to 24" high. I am willing to pay a reasonable price.... Regards, Woody

16th December 2003, 09:30 PM	#3
Da5id4Vz diyAudio Member Join Date: Feb 2003 Location: lost in america...	Commercial Source: A manufacture: http://www.middleatlantic.com/rackac.../bpanels.htm#6 Available through this distributor: http://www.markertek.com/ Not necessarily the cheapest in town, but descent quality. Also a source for custom fabrication and engraving: http://www.markertek.com/custom.html And finaly there are these guys who do a nice custom panel with EL backlit logo. http://www.rcicustom.com/index2.htm http://www.rcicustom.com/EL.htm

16th December 2003, 09:36 PM	#4
Apex Jr diyAudio Member Join Date: Jun 2002 Location: Torrance, Calif	Blank Rack Panels I have 2 - 17 1/2" Aluminum rack panels in stock at $15.00ea Steve @ Apex Jr

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th December 2003, 03:52 AM	#2
cm961 diyAudio Member Join Date: Jun 2001 Location: Peterborough, Ontario	I've seen them on Ebay before, otherwise you could try www.onlinemetals.com You'd still have to drill holes though. Pete

16th December 2003, 09:48 PM	#5
tiroth diyAudio Member Join Date: Dec 2001 Location: Pittsburgh, PA, USA	Can always rely on you for a good price Steve.

16th December 2003, 09:54 PM	#6
Da5id4Vz diyAudio Member Join Date: Feb 2003 Location: lost in america...	Sorry Steve I should have added you to my list too.

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read