The pcb is almost complete, you will need a pot, a selector switch and a +/-9V PSU.
The matched quad 2sk170bl-s are from Spencer.
Relays: EA2-12NJ NEC | Mouser
Resistors: Dale RN55D / RN60D
The Mezmerize was tested with the Salas shunt reg.
The traces are not cutted just scratched.
The price : 25 EUR + shipping.
PayPal preferred.
The matched quad 2sk170bl-s are from Spencer.
Relays: EA2-12NJ NEC | Mouser
Resistors: Dale RN55D / RN60D
The Mezmerize was tested with the Salas shunt reg.
The traces are not cutted just scratched.
The price : 25 EUR + shipping.
PayPal preferred.
Attachments
Neatly built, and very clean soldering.
Thank You!
Where do the traces on the far right go to in this photo?
Ooops!
I forgot it, that's the PSU for the 7812 which drives the relays.
So, it needs an additional ~+18V.
I will post photo soon.
Thanks!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.