• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

WTB : Electrolytic Caps

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
K

korben69

Member
Joined 2006
Hi All

I need some electrolytics to recap my Sugden A28.
I don't want to place an order for so few parts...

I'm looking for :
- 1 x 1uF / 100v (Nichicon PM/PW or Panasonic NHG/FC)
- 6 x 2.2uF / 100v (Nichicon PM/PW or Panasonic NHG/FC)
- 3 x 10uF / 100v (Nichicon PM/PW or Panasonic NHG/FC - 10x16)
- 6 x 470uF / 100v (Nichicon PM/PW or Panasonic NHG/FC - 16/18x35)
- 2 x 4700uF / 80v (Panasonic ECOS2AA472EA or equivalent - 30/35x50)
- 2 x 10000uF / 40v (Panasonic ECOS1HA103DA or equivalent - 30x50) -> Solved ;)

Shipping to France + Paypal fee.
Maybe we can trade I've got a lot of big cans ;)
Thanks for your answers
Regards

Phil
 
Last edited:
K

korben69

Member
Joined 2006
Not really urgent, I need those caps to end this replacing job. (about 25 years)
I can wait a little or share shipping fees if you place an order.
Min order at Mouser's is 70€TTC to reach free shipping.
My order is lower than this goal...

Thanks Steve, I really appreciate your care, as usual.
KMH in this value 4700uF/80v is too large for the enclosure (35x60 vs 35x50 max)

Thanks :)
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom